The West Penn HA210 is a high flex 10 AWG speaker cable, with fine stranded bare copper that makes it noticeably easier to bend and terminate than standard heavy gauge wire. Ideal for residential and...

The West Penn 25210 gives you 10 AWG speaker cable that can go straight through plenum ceilings. It is a good choice for long commercial speaker runs where the gauge has to be heavy and the jacket...

When a run is really long or the amps are really big, the West Penn C208 steps up to 8 AWG. It shares the C210 build of nylon jacketed conductors under a sunlight resistant jacket, and is approved...

The West Penn C210 is a heavy 10 AWG speaker cable built for large venues and long runs, where voltage drop starts to matter. Nylon jacketed conductors and a sunlight resistant PVC jacket mean it is...

West Penn DA2402 puts two individually shielded 110 ohm pairs in one jacket, ideal for running two AES/EBU digital audio streams side by side.Two 24 AWG stranded (7x32) tinned copper pairs, black/red...

The West Penn DA2401 is a 110 ohm cable made for AES/EBU digital audio. Low loss foam insulation and tight impedance control keep digital signals clean, and the shield is bonded to the jacket for...

The West Penn D25510 doubles up on noise protection: each of its two pairs is foil shielded, and an overall shield wraps the lot, with one 24 AWG drain common to all shields for low resistance...

With four individually shielded pairs under a flexible plenum jacket, the West Penn D25439 handles a small multichannel audio run above the ceiling in a single pull.Four 22 AWG stranded (7x30) tinned...

The West Penn D25430 is a two pair plenum audio snake for multichannel runs through ceiling spaces. Each pair has its own foil shield and drain, and FEP insulation keeps the cable slim and flexible...