TRENDnet TI-G102i 10 Port Industrial Gigabit L2 Managed DIN Rail Switch

TRENDnet TI-G102i 10 Port Industrial Gigabit L2 Managed DIN Rail Switch

The TRENDnet TI-G102i is a 10-port Layer 2 managed industrial switch with eight Gigabit RJ-45 ports and two SFP slots supporting 100/1000Base-FX modules. With 20Gbps of switching capacity and full L2 management, it suits automation, transport and utility networks that need segmentation and monitoring.

Management features include VLAN, LACP link aggregation, STP/RSTP, IGMP snooping, 802.1p QoS with queue scheduling, per-port bandwidth control and ERPSv2 ring protection. Redundant 12 to 60V DC inputs and an alarm output on power failure add resilience. The IP30 metal housing operates from -40 to 75 C (-40 to 167 F); power supply sold separately.

Key Features

• 8 x Gigabit ports
• 2 x SFP slots
• Supports 100/1000Base-FX fiber SFP modules
• 20Gbps switching capacity
• Hardened IP30 rated metal housing
• Includes DIN-rail mounting bracket
• Wide operating temperature range of -40° - 75° C (-40° - 167° F)
• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
• IEEE 802.1p QoS with queue scheduling support
• Bandwidth control per port
• Redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Supports Ethernet Ring Protection Switching (ERPSv2)
• Power supply sold separately (model: TI-M6024)
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.1ax; IEEE 802.3u; IEEE 802.3x; IEEE 802.3z; IEEE 802.3ab; IEEE 802.3ad; IEEE 802.3az
• Device Interface: 8 x Gigabit ports; 2 x 100/1000Mbps SFP slots; 6-pin removable terminal block (primary/RPS power inputs & alarm relay output); DIP switches; LED indicators; Reset button
• Data Transfer Rate: Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit Ethernet: 2000Mbps (full duplex)
• Performance: Switch fabric: 20Gbps; RAM buffer: 512KB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding mode: store and forward; Forwarding rate: 14.88Mpps (64-byte packet size)
• Management: HTTP web-based GUI; CLI: Telnet / SSHv2; SNMP v1, v2c, v3; SNMP trap (up to 5 receivers); RMON groups 1/2/3/9; Device configuration backup & restore, upgrade firmware, reboot, and reset to default; Multiple administrative or read-only user accounts; Enable or disable power saving mode per port; Static MAC entries; LLDP (Link layer discovery protocol); Netlite device map; ONVIF device discovery; SNTP; SMTP alert; Syslog; Port statistics/utilization; Traffic monitor; Port mirror: one to one, many to one; Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps); Loopback detection; DHCP relay/option 82; Modbus/TCP; SFP DDMI (Digital Diagnostic Monitoring Interface)
• MIB: MIB II RFC 1213; Bridge MIB RFC 1493; RMON (Group 1,2,3,9) RFC 2819 RFC 1757
• Spanning Tree: IEEE 802.1d STP (spanning tree protocol); IEEE 802.1w RSTP (rapid spanning tree protocol); BPDU filter, guard, and root guard; IEEE 802.1s MSTP (multiple spanning tree protocol)
• Link Aggregation: Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
• Quality of Service (QoS): 802.1p Class of service (CoS); DSCP (Differentiated Services Code Point); Bandwidth control per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
• VLAN: 802.1Q tagged VLAN; MAC-based VLAN; Port isolation; Up to 256 VLAN groups, ID range 1-4094
• Multicast: IGMP snooping v1, v2, v3; IGMP querier; IGMP fast leave; Up to 256 multicast groups; Static multicast entries
• Access Control: 802.1X authentication (Local user database, RADIUS, guest VLAN assignment); DHCP snooping/screening; Trusted host/IP access list for management access; Port Security/MAC address learning restriction (Up to 100 entries per port); Static/dynamic ARP inspection
• ACL: Source/Destination MAC address; Source/Destination IP address; Source Interface; VLAN ID; EtherType; TCP/UDP port 1-65535
• Special Features: Netlite device discovery and map display in GUI; Port security: MAC address learning restriction per port; DHCP relay/option 82 & DHCP server snooping/screening support; Wide operating temperature range; Redundant power inputs; Alarm relay triggered by power failure; Surge and ESD protection
• Power: PWR (Primary) terminal input: 12 - 60V DC; RPS (Redundant) terminal input: 12 - 60V DC; Compatible power supply: TI-M6024 (60W), TI-S12024 (120W), TI-S12048 (120W), and TI-S24048 (240W) sold separately; Max. consumption: 13W
• Terminal Block: Redundant power inputs, alarm relay contact, 6-pin; Wire range: 0.5 mm^2 to 2.5 mm^2; Solid wire (AWG): 12-26; Stranded wire (AWG): 12-26; Wire strip length: 10-11mm
• DIP Switch: SwitchStatusFunction1OFFDisable alarm relay for PWR power inputONEnable alarm relay for power failure on PWR power input2OFFDisable alarm relay for RPS power inputONEnable alarm relay for power failure on RPS power input3OFFStorm control managed by switch configurationONEnable storm control (Broadcast and DLF rate set to 300pps) Takes precedence over storm control switch configuration 4OFF802.1p QoS managed by switch configurationONEnable 802.1p QoS on ports 1 and 2 (Set CoS priority to tag 4 on ports 1 and 2) Takes precedence over 802.1p QoS switch configuration 5OFFPort 9 SFP set to Gigabit speed full duplexONPort 9 SFP set to 100Mbps speed full duplex6OFFPort 10 SFP set to Gigabit speed full duplexONPort 10 SFP set to 100Mbps speed full duplex
• Switch: Status
• ON: Enable alarm relay for power failure on PWR power input
• ON: Enable alarm relay for power failure on RPS power input
• ON: Enable storm control (Broadcast and DLF rate set to 300pps) Takes precedence over storm control switch configuration
• ON: Enable 802.1p QoS on ports 1 and 2 (Set CoS priority to tag 4 on ports 1 and 2) Takes precedence over 802.1p QoS switch configuration
• ON: Port 9 SFP set to 100Mbps speed full duplex
• ON: Port 10 SFP set to 100Mbps speed full duplex
• Alarm Relay Output: Relay output with current carrying capacity of 1A, 24V DC; Short circuit mode when one power source is connected; Open circuit mode when two power sources are connected
• Enclosure: IP30 rated metal enclosure; Fanless passive cooling; DIN-Rail mount; Grounding point; ESD (Ethernet) Protection: 8KV DC; Surge (Power) Protection: 2KV DC
• MTBF: 617,085 hours @ 25° C; 113,378 hours @ 75° C
• Operating Temperature: -40° - 75° C (-40° - 167° F)
• Operating Humidity: Max. 95% non-condensing
• Dimensions: 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
• Weight: 884g (1.95 lbs.)
• Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-32); Vibration (IEC 60068-2-6)
• Warranty: Lifetime Warranty

Package Contents

• TI-G102i
• Quick Installation Guide
• Removable terminal block
• DIN rail mounting bracket

TRENDnet part number TI-G102i.