TRENDnet TI-G160i 16 Port Industrial Gigabit L2 Managed DIN Rail Switch

TRENDnet TI-G160i 16 Port Industrial Gigabit L2 Managed DIN Rail Switch

The TRENDnet TI-G160i brings 16 managed Gigabit ports and 32Gbps of switching capacity to a DIN-rail switch. It supports remote cloud management through TRENDnet Hive (additional fee), alongside a full Layer 2 feature set for larger industrial deployments.

Features include LACP, STP/RSTP, VLAN, IGMP snooping, 802.1p QoS with queue scheduling, per-port bandwidth control and ERPSv2 ring protection. Redundant 12 to 60V DC inputs and an alarm relay on power failure provide fault tolerance. The IP40 metal housing operates from -40 to 75 C (-40 to 167 F); use the TI-M6024 power supply (sold separately).

Key Features

• 16 x Gigabit ports
• 32Gbps switching capacity
• Hardened IP40 rated metal housing
• Includes DIN-rail mounting bracket
• Operating temperature range of -40° - 75° C (-40° - 167° F)
• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
• IEEE 802.1p QoS with queue scheduling support
• Bandwidth control per port
• Remote cloud management with TRENDnet Hive™ (Additional fee applies)
• Redundant power inputs with overload current protection
• Supports Ethernet Ring Protection Switching (ERPSv2)
• Alarm relay output triggered by power failure
• Power supply sold separately (model: TI-M6024)
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.1ax; IEEE 802.3u; IEEE 802.3x; IEEE 802.3ab; IEEE 802.3ad; IEEE 802.3az
• Device Interface: 16 x Gigabit ports; 6-pin removable terminal block (primary/RPS power inputs & alarm relay output); DIP switch (Alarm for Primary/RPS power); LED indicators; Reboot button
• Performance: Switch fabric: 32Gbps; RAM buffer: 512KB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding rate: 23.8Mpps (64-byte packet size)
• Management: HTTP/HTTPS (TLS 1.3) web-based GUI; CLI: Telnet / SSHv2; SNMP v1, v2c, v3; SNMP trap (up to 5 receivers); RMON groups 1/2/3/9; Modbus TCP/IP; Device configuration backup & restore, upgrade firmware, reboot, and reset to default; Multiple administrative or read-only user accounts; Enable or disable power saving mode per port; Static MAC entries; LLDP (Link layer discovery protocol); Topology Map; ONVIF device discovery; SNTP; SMTP alert; Syslog; Port statistics/utilization; Traffic monitor; Port mirror: one to one, many to one; Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps); Loopback detection; DHCP relay/option 82; ERPS (Ethernet Ring Protection Switching) G8032v2
• Hive Cloud Management: Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser; Multi-device management; Provisioning through scheduled batch or configuration updates for multiple switches; Event/hardware network monitoring (CPU/memory utilization); Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
• MIB: MIB II RFC 1213; Bridge MIB RFC 1493; RMON (Group 1,2,3,9) RFC 2819 RFC 1757
• Spanning Tree: STP (spanning tree protocol); RSTP (rapid spanning tree protocol); BPDU filter, guard, and root guard
• Link Aggregation: Static link aggregation and dynamic LACP (Up to 8 groups)
• Quality of Service (QoS): 802.1p Class of service (CoS); DSCP (Differentiated Services Code Point); Bandwidth control per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
• VLAN: 802.1Q tagged VLAN; MAC-based VLAN; Protocol VLAN; Port isolation; Up to 256 VLAN groups, ID range 1-4094
• Multicast: IGMP snooping v1, v2, v3; IGMP querier; IGMP fast leave; Up to 256 multicast groups; Static multicast entries
• Access Control: 802.1X authentication (Local user database, RADIUS, guest VLAN assignment); DHCP snooping/screening; Trusted host/IP access list for management access; Port Security/MAC address learning restriction (Up to 100 entries per port); Static/dynamic ARP inspection
• ACL: Source/Destination MAC address; Source/Destination IP address; Source Interface; VLAN ID; EtherType; TCP/UDP port 1-65535
• Power: PWR (Primary) terminal input: 12 - 60V DC; RPS (Redundant) terminal input: 12 - 60V DC; Compatible power supply: TI-M6024 (60W) sold separately; Max. Consumption: 18W
• Terminal Block: Power inputs, alarm relay contact, 6 pin; Wire range: 0.5 mm2 to 2.5 mm2; Solid wire (AWG): 18-20; Stranded wire (AWG):18-20; Wire strip length: 10-11mm
• DIP Switch: Switch 1 Status: Off Function: Disable alarm relay for PWR power input Status: On Function: Enable alarm relay for power failure on PWR power input; Status: Off; Function: Disable alarm relay for PWR power input; Status: On; Function: Enable alarm relay for power failure on PWR power input; Switch 2 Status: Off Function: Disable alarm relay for RPS power input Status: On Function: Enable alarm relay for power failure on RPS power input; Status: Off; Function: Disable alarm relay for RPS power input; Status: On; Function: Enable alarm relay for power failure on RPS power input
• Alarm Relay Output: Relay outputs with current carrying capacity of 1A, 24V DC; Short circuit mode when one power source is connected; Open circuit mode when two power sources are connected
• Enclosure: IP40 rated metal enclosure; Fanless passive cooling; DIN-Rail mount; Grounding Point; ESD (Ethernet) Protection: 8KV DC; Surge (Data) Protection: 1kV DC; Surge (Power) Protection: 1KV DC
• MTBF: 576,317 hours @ 25° C
• Operating Temperature: -40° - 75° C (-40° - 167° F)
• Operating Humidity: Max. 95% non-condensing
• Dimensions: 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
• Weight: 928g (2.05 lbs.)
• Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-32); Vibration (IEC 60068-2-6)
• Warranty: Lifetime Warranty

Package Contents

• TI-G160i
• Removable terminal block
• DIN-Rail mounting bracket

TRENDnet part number TI-G160i.