TRENDnet TI-PG103i 10 Port Industrial Gigabit L2 Managed PoE+ DIN Rail Switch with Fiber Support

TRENDnet TI-PG103i 10 Port Industrial Gigabit L2 Managed PoE+ DIN Rail Switch with Fiber Support

The TRENDnet TI-PG103i is a 10-port Layer 2 managed PoE+ DIN-rail switch with eight Gigabit PoE+ ports and two SFP ports for 100/1000Base-FX fiber. It runs from 24 to 57V DC with a 240W PoE budget at 48V or 124W at 24V, and supports TRENDnet Hive cloud management (additional fee).

Its feature set covers LACP, STP/RSTP, VLAN, IGMP snooping, 802.1p QoS, per-port bandwidth control and PoE alive check. Redundant power inputs and an alarm output provide fault tolerance. Switching capacity is 20Gbps, and the IP40 metal housing operates from -40 to 75 C (-40 to 167 F). Power supply sold separately.

Key Features

• 8 x Gigabit PoE+ ports
• 2 x SFP ports
• Supports 100/1000Base-FX fiber SFP modules
• PoE power budget: 240W@48VDC or 124W@24VDC
• PoE alive check restarts unresponsive PoE powered devices
• Remote cloud management with TRENDnet Hive (Additional fee applies)
• 20Gbps switching capacity
• Hardened IP40 rated metal housing
• Includes DIN-Rail mounting bracket
• Operating temperature range of -40° - 75° C (-40° - 167° F)
• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
• IEEE 802.1p QoS with queue scheduling support
• Bandwidth control per port
• Redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-S24048, TI-S48048, TI-S24052, TI-S15052)
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.1ax; IEEE 802.3u; IEEE 802.3x; IEEE 802.3z; IEEE 802.3ab; IEEE 802.3ad; IEEE 802.3az; IEEE 802.3af; IEEE 802.3at
• Device Interface: 8 x Gigabit PoE+ ports; 2 x 100/1000Mbps SFP ports; 6-pin removable terminal block (primary/RPS power inputs & alarm relay output); DIP switches; LED indicators; Reset button
• Performance: Switch fabric: 20Gbps; RAM buffer: 128MB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding rate: 14.88Mpps (64-byte packet size)
• Management: HTTP web-based GUI; CLI: Telnet / SSHv2; SNMP v1, v2c, v3; SNMP trap (up to 5 receivers); RMON groups 1/2/3/9; Modbus; Device configuration backup & restore, upgrade firmware, reboot, and reset to default; Multiple administrative or read-only user accounts; Enable or disable power saving mode per port; Static MAC entries; LLDP (Link layer discovery protocol); Topology map; ONVIF device discovery; SNTP; SMTP alert; Syslog; Port statistics/utilization; Traffic monitor; Port mirror: one to one, many to one; Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps); Loopback detection; DHCP relay/option 82; SFP DDMI (Digital Diagnostic Monitoring Interface); ERPS (Ethernet Ring Protection Switching) G8032v2
• Hive Cloud Management: Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser; Multi-device management; Provisioning through scheduled batch firmware or configuration updates for multiple switches; Event/hardware network monitoring (CPU/memory utilization); Enable & disable PoE, set PD (powered device) alive check, configure PoE scheduling, and monitor PoE budget utilization (for PoE switches only); Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
• MIB: MIB II RFC 1213; Bridge MIB RFC 1493; RMON (Group 1,2,3,9) RFC 2819 RFC 1757
• Spanning Tree: IEEE 802.1d STP (spanning tree protocol); IEEE 802.1w RSTP (rapid spanning tree protocol); BPDU filter, guard, and root guard
• Link Aggregation: Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
• Quality of Service (QoS): 802.1p Class of service (CoS); DSCP (Differentiated Services Code Point); Bandwidth control per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
• VLAN: 802.1Q tagged VLAN; MAC-based VLAN; Protocol VLAN; Port isolation; Up to 256 VLAN groups, ID range 1-4094
• Multicast: IGMP snooping v1, v2, v3; IGMP querier; IGMP fast leave; Up to 256 multicast groups; Static multicast entries
• Access Control: 802.1X authentication (Local user database, RADIUS, guest VLAN assignment); DHCP snooping/screening; Trusted host/IP access list for management access; Port Security/MAC address learning restriction (Up to 100 entries per port); Static/dynamic ARP inspection
• ACL: Source/Destination MAC address; Source/Destination IP address; Source Interface; VLAN ID; EtherType; TCP/UDP port 1-65535
• Special Features: Netlite device discovery and map display in GUI; Port security: MAC address learning restriction per port; DHCP relay/option 82 & DHCP server snooping/screening support; Wide operating temperature range; Redundant power inputs; Alarm relay triggered by power failure; Surge and ESD protection
• Power: PWR (Primary) terminal input: 24 - 57V DC; RPS (Redundant) terminal input: 24 - 57V DC; Compatible power supply: TI-S12024 (120W), TI-S24048 (240W), TI-S48048 (480W) sold separately; Max. Consumption: 13W (no PoE load), 253W (full PoE load)
• PoE: PoE budget: 240W@48V DC input, 124W@24V DC input; 802.3at: Up to 30W per port; PoE Mode A: Pins 1, 2, 3, and 6 for power; PoE auto classification; PoE port priority/power scheduling/PD alive check; Over current/short circuit protection
• Terminal Block: Redundant power inputs, alarm relay contact, 6 pin; Wire range: 0.5 mm² to 2.5 mm²; Solid wire (AWG): 12-26; Stranded wire (AWG): 12-26; Wire strip length: 10-11mm
• DIP Switch: SwitchStatusFunction1OFFDisable alarm relay for PWR power input ON Enable alarm relay for power failure on PWR power input 2 OFF Disable alarm relay for RPS power input ON Enable alarm relay for power failure on RPS power input 3 OFF Storm control managed by switch configuration ON Enable storm control (Broadcast and DLF rate set to 300pps) Takes precedence over storm control switch configuration 4 OFF 802.1p QoS managed by switch configuration ON Enable 802.1p QoS on ports 1 and 2 (Set CoS priority to tag 4 on ports 1 and 2) Takes precedence over 802.1p QoS switch configuration 5 OFF Port 9 SFP set to Gigabit speed full duplex ON Port 9 SFP set to 100Mbps speed full duplex 6 OFF Port 10 SFP set to Gigabit speed full duplex ON Port 10 SFP set to 100Mbps speed full duplex
• Alarm Relay Output: Relay output with current carrying capacity of 1A, 24V DC; Short circuit mode when one power source is connected; Open circuit mode when two power sources are connected
• Enclosure: IP40 rated metal enclosure; Fanless passive cooling; DIN-Rail mount; Grounding point; ESD (Ethernet) Protection: 8kV DC; Surge (Power) Protection: 6kV DC
• MTBF: 460,726 hours @ 25° C
• Operating Temperature: -40° - 75° C (-40° - 167° F)
• Operating Humidity: Max. 95% non-condensing
• Dimensions: 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
• Weight: 930g (2.05 lbs.)
• Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-32); Vibration (IEC 60068-2-6)
• Warranty: Lifetime Warranty

Package Contents

• TI-PG103i
• Removable terminal block
• DIN-Rail mounting bracket

TRENDnet part number TI-PG103i.