TRENDnet TI-PG743Bi 7 Port Industrial Gigabit L2 Managed PoE+ DIN Rail Switch
The TRENDnet TI-PG743Bi is a Layer 2 managed industrial switch with four Gigabit PoE+ ports, one Gigabit port and two SFP ports that support 100/1000Base-FX modules. It runs from a 24 to 57V DC input and delivers a 120W PoE budget at either 24V or 48V, which makes it useful where only 24V power is available.
Management includes LACP, STP/RSTP, VLAN, IGMP snooping, 802.1p QoS, per-port bandwidth control, ERPSv2 ring protection, PoE alive check and optional TRENDnet Hive cloud management (additional fee). Switching capacity is 14Gbps, and the IP40 metal housing operates from -40 to 75 C (-40 to 167 F). Note the power inputs are not redundant; power supply sold separately.
Key Features
- 4 x Gigabit PoE+ ports
- 1 x Gigabit port
- 2 x SFP ports
- Supports 100/1000Base-FX fiber SFP modules
- PoE power budget: 120W@48V DC or 120W@24V DC
- PoE alive check restarts unresponsive PoE powered devices
- 14Gbps switching capacity
- Hardened IP40 rated metal housing
- Includes DIN-Rail mounting bracket
- Operating temperature range of -40° - 75° C (-40° - 167° F)
- Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
- IEEE 802.1p QoS with queue scheduling support
- Bandwidth control per port
- Remote cloud management with TRENDnet Hive™ (Additional fee applies)
- Single power input with overload current protection
- Supports Ethernet Ring Protection Switching (ERPSv2)
- Power supply sold separately (models: TI-S24048, TI-S24052, TI-S15052)
- Power adapter sold separately: 48VDC3000
- NDAA / TAA compliant (U.S. and Canada only)
Specifications
- Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.1ax; IEEE 802.3u; IEEE 802.3x; IEEE 802.3z; IEEE 802.3ab; IEEE 802.3ad; IEEE 802.3az; IEEE 802.3af; IEEE 802.3at
- Device Interface: 4 x Gigabit PoE+ ports; 1 x Gigabit port; 2 x 100/1000Mbps SFP ports; 2-pin removable terminal block (power input); 4-pin DIN (power adapter input); LED indicators; Reset button; Ground terminal
- Performance: Switch fabric: 14Gbps; RAM buffer: 512KB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding rate: 10.42Mpps (64-byte packet size)
- Management: HTTP web-based GUI; CLI: Telnet / SSHv2; SNMP v1, v2c, v3; SNMP trap (up to 5 receivers); RMON groups 1/2/3/9; Modbus TCP/IP; Device configuration backup & restore, upgrade firmware, reboot, and reset to default; Multiple administrative or read-only user accounts; Enable or disable power saving mode per port; Static MAC entries; LLDP (Link layer discovery protocol); Topology Map; ONVIF device discovery; SNTP; SMTP alert; Syslog; Port statistics/utilization; Traffic monitor; Port mirror: one to one, many to one; Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps); Loopback detection; DHCP relay/option 82; SFP DDMI (Digital Diagnostic Monitoring Interface); ERPS (Ethernet Ring Protection Switching) G8032v2
- Hive Cloud Management: Configure, monitor, and manage through the TRENDnet Hive Cloud Management Portal remotely via PC or Mac web browser; Multi-device management; Provisioning through scheduled batch or configuration updates for multiple switches; Event/hardware network monitoring (CPU/memory utilization); Configure features such as IP address settings, VLANs, spanning tree, loopback detection, IGMP snooping, link aggregation, and bandwidth control through cloud management
- MIB: MIB II RFC 1213; Bridge MIB RFC 1493; RMON (Group 1,2,3,9) RFC 2819 RFC 1757
- Spanning Tree: STP (spanning tree protocol); RSTP (rapid spanning tree protocol); BPDU filter, guard, and root guard
- Link Aggregation: Static link aggregation and dynamic LACP (Up to 3 groups)
- Quality of Service (QoS): 802.1p Class of service (CoS); DSCP (Differentiated Services Code Point); Bandwidth control per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
- VLAN: 802.1Q tagged VLAN; MAC-based VLAN; Protocol VLAN; Port isolation; Up to 256 VLAN groups, ID range 1-4094
- Multicast: IGMP snooping v1, v2, v3; IGMP querier; IGMP fast leave; Up to 256 multicast groups; Static multicast entries
- Access Control: 802.1X authentication (Local user database, RADIUS, guest VLAN assignment); DHCP snooping/screening; Trusted host/IP access list for management access; Port Security/MAC address learning restriction (Up to 100 entries per port); Static/dynamic ARP inspection
- ACL: Source/Destination MAC address; Source/Destination IP address; Source Interface; VLAN ID; EtherType; TCP/UDP port 1-65535
- Power: PWR (Primary) terminal input (2-pin): 24 - 57V DC; Power adapter input (4-pin DIN): 24 - 57V DC Note: Power inputs are not redundant, only one power source can be used for operation.; Compatible power supply: TI-S12048 (120W), TI-S15052 (150W), TI-S24052 (240W) sold separately; Compatible power adapter: 48VDC3000 (sold separately); Max. Consumption: 14W (no PoE load), 134W (full PoE load)
- PoE: PoE budget: 120W@48V DC input, 120W@24V DC input; 802.3at: Up to 30W per port; PoE Mode A: Pins 1, 2, 3, and 6 for power; PoE auto classification; PoE port priority/power scheduling/PD alive check; Over current/short circuit protection
- Terminal Block: Power input, 2 pin; Wire range: 0.5 mm2 to 2.5 mm2; Solid wire (AWG): 18-20; Stranded wire (AWG): 18-20; Wire strip length: 10-11mm
- Enclosure: IP40 rated metal enclosure; Fanless passive cooling; DIN-Rail mount; Grounding point; ESD (Ethernet) Protection: 8kV DC; Surge (Data) Protection: 1kV DC; Surge (Power) Protection: 0.5kV DC
- MTBF: 754,136 hours @ 25° C
- Operating Temperature: -40° - 75° C (-40° - 167° F)
- Operating Humidity: Max. 95% non-condensing
- Dimensions: 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
- Weight: 844g (1.86 lbs.)
- Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-32); Vibration (IEC 60068-2-6)
- Warranty: Lifetime Warranty
Package Contents
- TI-PG743Bi
- Removable terminal block
- DIN-Rail mounting bracket
TRENDnet part number TI-PG743Bi.
