TRENDnet TI-RG262i 26 Port Industrial Gigabit L2 Managed Rackmount Switch

TRENDnet TI-RG262i 26 Port Industrial Gigabit L2 Managed Rackmount Switch

The TRENDnet TI-RG262i is a 26-port Layer 2 managed industrial rackmount switch with 24 Gigabit RJ-45 ports and two SFP ports supporting 100/1000Base-FX fiber. It suits network rooms that need industrial durability and full management without PoE.

Features include CLI, web and SNMP v1/2c/3 management, LACP, STP/RSTP, VLAN, IGMP snooping, MVR, 802.1p QoS, per-port bandwidth control and ERPS ring protection, with 52Gbps of switching capacity. The IP30 metal housing operates from -40 to 70 C (-40 to 158 F) and includes a 19-inch rackmount kit. Use the TI-S15052 power supply (sold separately).

Key Features

• 24 x Gigabit ports
• 2 x SFP ports
• Supports 100/1000Base-FX fiber SFP modules
• 52Gbps switching capacity
• Hardened IP30 rated metal housing
• Operating temperature range of -40° - 70° C (-40° - 158° F)
• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
• IEEE 802.1p QoS with queue scheduling support
• CLI (Console / Telnet / SSH), Web (HTTP), SNMP v1 / 2c / 3 management
• IGMP Snooping / MVR support
• Bandwidth control per port
• Supports Ethernet Ring Protection Switching (ERPS)
• 19” rack mountable metal housing with included mounting kit
• Power supply sold separately (model: TI-S15052)
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.1ax; IEEE 802.3u; IEEE 802.3x; IEEE 802.3ab; IEEE 802.3az
• Device Interface: 24 x Gigabit ports; 2 x Gigabit SFP ports; 1 x Console port (RJ-45); Fixed 2-pin power terminal; LED indicators
• Data Transfer Rate: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit Ethernet: 2000Mbps (full duplex); SFP: 2000Mbps (full duplex)
• Performance: Switch fabric: 52Gbps; Data RAM buffer: 512KB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding mode: store and forward; Forwarding rate: 38.7Mpps (64-byte packet size)
• Management: HTTP web-based GUI; CLI: Telnet / SSHv2; SNMP v1, v2c, v3; SNMP trap (up to 5 receivers); RMON groups 1/2/3/9; Device configuration backup & restore, upgrade firmware, reboot, and reset to default; Multiple administrative or read-only user accounts; Enable or disable power saving mode per port; Static MAC entries; Static unicast entries; LLDP (Link layer discovery protocol); Netlite device map; ONVIF device discovery; SNTP; SMTP alert; Syslog; Port statistics/utilization; Traffic monitor; Port mirror: one to one, many to one; Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps); Loopback detection; DHCP relay/option 82; Modbus/TCP; ERPS (Ethernet Ring Protection Switching) G8032v2
• MIB: MIB II RFC 1213; Bridge MIB RFC 1493; RMON (Group 1,2,3,9) RFC 2819 RFC 1757
• Spanning Tree: IEEE 802.1d STP (spanning tree protocol); IEEE 802.1w RSTP (rapid spanning tree protocol); BPDU filter, guard, and root guard
• Link Aggregation: Static link aggregation and 802.1ax/802.3ad dynamic LACP (Up to 8 groups)
• Quality of Service (QoS): 802.1p Class of service (CoS); DSCP (Differentiated Services Code Point); Bandwidth control per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
• VLAN: 802.1Q tagged VLAN; MAC-based VLAN; Port isolation; Up to 256 VLAN groups, ID range 1-4094
• Multicast: IGMP snooping v1, v2, v3; IGMP querier; IGMP fast/immediate leave; Up to 256 multicast groups; Static multicast entries
• Access Control: 802.1X authentication (Local user database, RADIUS, guest VLAN assignment); DHCP snooping/screening; Trusted host/IP access list for management access; Port Security/MAC address learning restriction (Up to 100 entries per port); Static/dynamic ARP inspection
• ACL: Source/Destination MAC address; Source/Destination IP address; Source Interface; VLAN ID; EtherType; TCP/UDP port 1-65535
• Special Features: Netlite device discovery and map display in GUI; Port security: MAC address learning restriction per port; DHCP relay/option 82 & DHCP server snooping/screening support; Wide operating temperature range; Surge and ESD protection
• Power: Power terminal input: 48 - 57V DC; Compatible power supply: TI-S15052; Max. Consumption: 20W
• Terminal Block: Power input, 2 pin; Wire range: 1.5 mm^2 to 2.5 mm^2; Solid wire (AWG): 12-18; Stranded wire (AWG): 12-18; Wire strip length: 10-11mm
• Enclosure: IP30 rated metal enclosure; Fanless passive cooling; Rack mountable 1U; Grounding point; ESD (Ethernet) Protection: 8KV DC (Air) 4KV (Contact); Surge (Power) Protection: 1KV DC
• MTBF: 475,352 hours @ 25° C; 127,076 hours @ 70° C
• Operating Temperature: -40° - 70° C (-40° - 158° F)
• Operating Humidity: Max. 95% non-condensing
• Dimensions: 440 x 284 x 44mm (17.32 x 11.18 x 1.7 in.)
• Weight: 3.46kg (7.62 lbs.)
• Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-31); Vibration (IEC 60068-2-6)
• Warranty: Lifetime Warranty

Package Contents

• TI-RG262i
• Quick Installation Guide
• Console cable (RJ-45 to RS-232)
• Rackmount kit

TRENDnet part number TI-RG262i.