Klein 4'' Midget Diagonal Cutting Pliers Flush D295-4C Miniature jaw for close-quarter work with maximum visibility. Miniature jaw for close-quarter work with maximum visibility. Sharp pointed nose for precise tip cutting. Spring-loaded...

Klein 4'' Midget Diagonal Cutting Pliers D257-4C Tapered nose for easy working in confined areas and close tip cutting. Tapered nose for easy working in confined areas and close tip cutting. Spring-loaded action for self-opening. Short...

Klein 4'' Midget Diagonal Cutting Pliers D257-4 Tapered nose for easy working in confined areas and close tip cutting. Tapered nose for easy working in confined areas and close tip cutting. Short jaws and beveled cutting edges permit close cutting...

Klein 4'' Electronics Diagonal Cutting Pliers D230-4C Semi-flush designed to cut nickel ribbon wire. Semi-flush designed to cut nickel ribbon wire. Nose tip is 1/32'' (1 mm) for precise work in confined areas. Tip cutting knife is 3/16''...

Klein 4'' Diagonal Cutting Pliers Pointed D209-4CSharp pointed nose for precise tip cutting and trimming printed circuit boards. Spring-loaded for self-opening action. Short jaws and beveled cutting edges permit close cutting of wire...

For labeling wires, cables, and rounded surfaces. Flexible Nylon labels conform and stick tightly to wires, cables, curved and textured surfaces. Tear-proof material resists damage when pulled through tight spaces or conduits.  

For labeling panels, blocks, faceplates, shelves, bins, beams and more. Permanent Polyester labels have a polished finish that leaves your work looking professional. Available in smaller widths that fit most patch panels, blocks and other distribution...

Greenlee 18' Push and Pull Pole Non-Conductive FP18 Designed specifically for pushing and pulling wires over long distances Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics Non-conductive, high-impact...

Greenlee 24' Push and Pull Pole Non-Conductive FP24 Designed specifically for pushing and pulling wires over long distances Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics Non-conductive, high-impact...

200' Fiberglass Fish Tape Easy Quick Reel Case Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Non-conductive, fiberglass fish tape slides...

The Net Chaser™ Ethernet Speed Certifier & Network Tester offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the...

41 Piece Journeyman Tool Set Starter Kit for the Professional Comfortable and durable tools for the professional. Contains Journeyman side-cutting (1), diagonal-cutting ((1), long-nose (2), Pump pliers (1), Crimping/cutting tool (1) and cable cutter...

13 Piece Professional Insulated Utility Tool Kit Screwdrivers Pliers Hard Carry Case A set of 13 professional, insulated tools including assorted (4) pliers, (6) screwdrivers, (1) cable cutter, pump pliers and a skinning knife. (See individual tool...

Haevy Duty Ratcheting Communications Cable Cutter 750MCM Copper or Aluminum Ratchet-action design provides maximum leverage with minimum effort for heavy-duty use. Cuts steel and ACSR. Forged, heat-treated, shear-type blades, plus a 24'' (610 mm)...

22 Piece General Purpose Insulated Tool Kit A comprehensive set of 22 insulated tools including assorted pliers (8), screwdrivers (9), pump pliers, wire stripper/cutter, cable cutter, lineman’s skinning knife and a crimping/cutting tool. (See...

Torque Wrench 3/8" with Square Drive Ratchet Head Torque range of 30 - 150 ft-lb (20.4 - 102 Nm). Micro-adjustable for increased accuracy. Easy to read and adjust with quick release lever. Stainless steel handle provides improved, more comfortable...

Torque Wrench 3/8" with Square Drive Ratchet Head Torque range of 15 - 75 ft-lb (20.4 - 102 Nm). Micro-adjustable for increased accuracy. Easy to read and adjust with quick release lever. Stainless steel handle provides improved, more comfortable...

Master Electrcians Torque Tool Kit 25 Piece One 7/16'' internal hex drive micrometer-adjustable torque wrench. Torque range: 200-1200 in-lb. (22.6-135.6 Nm) with 10 in-lb. incremements (1.1 Nm). One 7/16'' internal hex drive micrometer-adjustable...

Ideal R153001 NaviTEK NT Network Testing and Troubleshooting Tool The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows...

CABLE TRANSMISSION TESTER - SignalTEK® CT Replaced by 156006 If you install or maintain data cabling, SignalTEK CT® allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates. For installers,...