The Tempo 468R-G is the replacement receiver unit for the 468-G Wiremap Tester. Connecting the receiver to the far end of the link starts the test automatically, and its sequencing red and green LEDs show opens, shorts, reversed and transposed pairs on RJ45 voice and data cabling.
Features:
Genuine replacement receiver for the 468-G kit
Red/green LED indication of good and bad connections
Tests T568A, T568B and USOC wiring with the 468-G transmitter
The Tempo 468-G Wiremap Tester checks four-pair voice and data links terminated in standard 8-position RJ45 jacks. LEDs light in sequence for each wire, which makes miswires far easier to spot than...
Tempo RMT-1 replacement metal tips restore 200B-G and 200EP-G tone probes. The nickel-plated brass tip has 0 ohm resistance for the strongest pickup when probing insulated wire or making direct metal...
CABLE TRANSMISSION TESTER - SignalTEK® CT
Replaced by 156006
If you install or maintain data cabling, SignalTEK CT® allows you to generate PDF test reports that prove installed links run at Gigabit...
The Tempo 77M-G Classic Series Tone Generator puts a tracing tone on a wire so you can find it in a bundle, at a cross-connect or at the far end. It works on twisted pair telecom and datacom wiring,...
The Tempo 77HP-G produces a strong audio tracing tone, with two selectable tones, that a Tempo probe such as the 200EP-G picks up easily. Use it to identify a conductor in a bundle, at a...
