West Penn 240 bundles four solid 22 AWG copper conductors into one slim riser-rated cable. It is a tidy choice for alarm, intercom and control wiring where four wires need to land firmly on screw terminals or punch-down blocks.
4 conductors of 22 AWG solid ASTM bare copper
Nominal DC resistance 17.5 ohms per 1000 ft
Thermoplastic insulation, .008 in nominal thickness
Insulation colors: black, red, white, green
Cabled construction, jacket .017 in thick, nominal OD .134 in
NEC Type CMR
Overall PVC jacket with rip cord
UL and cUL listed, meets 300V NEC requirements
Flame rating UL 1666
Packaged in West Penn's Advantage Box
Applications: speaker level, audio circuits, low-voltage power, background music
West Penn Wire 220 is a two-conductor, 22 AWG solid bare copper cable with no shield, built for low-voltage work where a stiff solid conductor is preferred for punch-down and screw terminals. Its...
West Penn 230 is a three-conductor 22 AWG cable with solid bare copper conductors, built for low-voltage control, signaling and audio circuits inside buildings. Solid conductors make it a good fit...
West Penn 241 is the go-to four-conductor 22 AWG stranded cable for security sensors, keypads, intercom and general control circuits. Stranded conductors make it easy to pull and dress neatly in...
West Penn 369 pairs a shielded audio pair with four unshielded conductors, giving intercom and door entry systems room for audio, call, door release and power in one cable.Six 22 AWG solid ASTM bare...
West Penn 270 packs six 22 AWG stranded conductors into a compact riser-rated jacket, a common pick for card readers, keypads and control systems that need several circuits in one pull.6 conductors...
