West Penn 230 is a three-conductor 22 AWG cable with solid bare copper conductors, built for low-voltage control, signaling and audio circuits inside buildings. Solid conductors make it a good fit for punch-down and screw-terminal connections where a firm termination matters.
Three 22 AWG solid ASTM bare copper conductors
Nominal DC resistance 17.5 ohms per 1000 ft
Thermoplastic insulation, .008 in nominal thickness
Cabled construction under an overall PVC jacket with rip cord
Nominal outside diameter .125 in
NEC Type CMR, UL and cUL listed, meets 300V NEC requirements
Flame rating UL 1666
Insulation colors: black, red, white
Applications: speaker level, audio circuits, low-voltage power, background music
West Penn 240 bundles four solid 22 AWG copper conductors into one slim riser-rated cable. It is a tidy choice for alarm, intercom and control wiring where four wires need to land firmly on screw...
West Penn Wire 220 is a two-conductor, 22 AWG solid bare copper cable with no shield, built for low-voltage work where a stiff solid conductor is preferred for punch-down and screw terminals. Its...
West Penn 231 pairs three 22 AWG stranded conductors in a slim riser-rated jacket. The 7x30 stranding gives it more flex than solid wire, so it pulls easily through tight runs for intercom, control...
West Penn 270 packs six 22 AWG stranded conductors into a compact riser-rated jacket, a common pick for card readers, keypads and control systems that need several circuits in one pull.6 conductors...
West Penn 855 is a five-conductor 22 AWG stranded cable for control and signaling jobs that need one more wire than a standard quad. It works well for door hardware, sensors and instrumentation...
