Klein 8'' High Leverage Diagonal-Cutters D228-8 High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs. Short jaws and beveled...

Klein 5'' Lightweight Flush Cutter D275-5 Shears wire up to 18 AWG producing a flat, flush cut Shears wire up to 18 AWG producing a flat, flush cut Shear cutting greatly reduces cutting...

Klevin 5'' Electronics Diagonal Cutting Pliers D209-5C Sharp pointed nose for precise tip cutting and trimming printed circuit boards. Sharp pointed nose for precise tip cutting and trimming...

Klein 4'' Midget Diagonal Cutting Pliers Flush D295-4C Miniature jaw for close-quarter work with maximum visibility. Miniature jaw for close-quarter work with maximum visibility. Sharp...

Klein 4'' Midget Diagonal Cutting Pliers D257-4C Tapered nose for easy working in confined areas and close tip cutting. Tapered nose for easy working in confined areas and close tip cutting...

Klein 4'' Midget Diagonal Cutting Pliers D257-4 Tapered nose for easy working in confined areas and close tip cutting. Tapered nose for easy working in confined areas and close tip cutting. Short...

Klein 4'' Electronics Diagonal Cutting Pliers D230-4C Semi-flush designed to cut nickel ribbon wire. Semi-flush designed to cut nickel ribbon wire. Nose tip is 1/32'' (1 mm) for precise...

Klein 4'' Diagonal Cutting Pliers Pointed D209-4CSharp pointed nose for precise tip cutting and trimming printed circuit boards. Spring-loaded for self-opening action. Short jaws and beveled...

For labeling wires, cables, and rounded surfaces. Flexible Nylon labels conform and stick tightly to wires, cables, curved and textured surfaces. Tear-proof material resists damage when pulled...

For labeling panels, blocks, faceplates, shelves, bins, beams and more. Permanent Polyester labels have a polished finish that leaves your work looking professional. Available in smaller widths that...

Greenlee 18' Push and Pull Pole Non-Conductive FP18 Designed specifically for pushing and pulling wires over long distances Push or pull wires over suspended ceilings, under sub-floors or crawl...

Greenlee 24' Push and Pull Pole Non-Conductive FP24 Designed specifically for pushing and pulling wires over long distances Push or pull wires over suspended ceilings, under sub-floors or crawl...

200' Fiberglass Fish Tape Easy Quick Reel Case Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left...

The Net Chaser™ Ethernet Speed Certifier & Network Tester offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for...

41 Piece Journeyman Tool Set Starter Kit for the Professional Comfortable and durable tools for the professional. Contains Journeyman side-cutting (1), diagonal-cutting ((1), long-nose (2), Pump...

13 Piece Professional Insulated Utility Tool Kit Screwdrivers Pliers Hard Carry Case A set of 13 professional, insulated tools including assorted (4) pliers, (6) screwdrivers, (1) cable cutter, pump...

Haevy Duty Ratcheting Communications Cable Cutter 750MCM Copper or Aluminum Ratchet-action design provides maximum leverage with minimum effort for heavy-duty use. Cuts steel and ACSR. Forged,...

22 Piece General Purpose Insulated Tool Kit A comprehensive set of 22 insulated tools including assorted pliers (8), screwdrivers (9), pump pliers, wire stripper/cutter, cable cutter, lineman’s...

Torque Wrench 3/8" with Square Drive Ratchet Head Torque range of 30 - 150 ft-lb (20.4 - 102 Nm). Micro-adjustable for increased accuracy. Easy to read and adjust with quick release lever...

Torque Wrench 3/8" with Square Drive Ratchet Head Torque range of 15 - 75 ft-lb (20.4 - 102 Nm). Micro-adjustable for increased accuracy. Easy to read and adjust with quick release lever...