West Penn 3651 puts two twisted pairs of 22 AWG stranded copper under one overall foil shield, a handy cable for intercom stations, access control devices and audio runs that need two signal pairs in...

West Penn 452 is a miniature shielded twisted pair with stranded tinned copper, a flexible, low-capacitance choice for balanced line-level audio, rack wiring and short mic-level runs.One twisted pair...

West Penn 451 is a slim three-conductor miniature audio cable with solid tinned copper and a full foil shield. Its small diameter makes it ideal for line-level audio and control wiring in crowded...

West Penn 369 pairs a shielded audio pair with four unshielded conductors, giving intercom and door entry systems room for audio, call, door release and power in one cable.Six 22 AWG solid ASTM bare...

West Penn 360 is the heavy-duty combination cable, with a shielded 18 AWG audio pair and two unshielded 18 AWG conductors for long intercom, paging and powered device runs.Four 18 AWG stranded (7x26)...

West Penn 359 gives you a shielded 20 AWG audio pair plus two unshielded 20 AWG conductors, helpful for longer intercom and sound runs where 22 gauge would drop too much voltage.Four 20 AWG stranded...

West Penn 358 runs a shielded 20 AWG audio pair with one extra unshielded conductor, a neat solution for intercom and paging stations that need a common or call line alongside audio.Three 20 AWG...

West Penn 357 is the stranded version of the classic intercom combination cable: a shielded 22 AWG audio pair alongside two unshielded conductors for call, door release or power.Four 22 AWG stranded...

West Penn 356 mixes 20 and 18 AWG stranded conductors, pairing a shielded audio pair with heavier unshielded conductors for power, so amplified intercom and paging devices can be wired with one cable...

West Penn 355 combines a shielded audio pair with two unshielded conductors in one jacket, so intercom and sound systems can carry audio and call or power wiring in a single pull.Four 22 AWG solid...

West Penn 303 offers three 18 AWG stranded conductors under a full foil shield, for longer balanced audio, sensor and low-voltage power runs that need extra copper.Three 18 AWG stranded (7x26) ASTM...

West Penn 301 is a three-conductor 22 AWG stranded shielded cable, the everyday choice for balanced microphone and line-level audio, intercom and three-wire control runs.Three 22 AWG stranded (7x30)...

West Penn 300 bundles three 22 AWG solid conductors under an overall foil shield, a good fit for balanced audio and control circuits that terminate on screw or punch-down terminals.Three 22 AWG solid...

West Penn 296 is the heaviest shielded pair in the range, with 12 AWG stranded conductors and a CL3R riser rating for long, high-power runs that still need full foil shielding.Two 12 AWG stranded...

West Penn 295 is a heavy 14 AWG shielded pair with a CL3R riser rating, built for long, higher-power runs where both low resistance and shielding matter.Two 14 AWG stranded (19x27) ASTM bare copper...

West Penn 294 is a 16 AWG shielded pair for runs that carry more current, such as powered speakers, low-voltage power to devices, or long audio lines that also need noise protection.Two 16 AWG...

West Penn 292 steps up to a 20 AWG shielded pair, giving lower resistance for longer audio, control and low-voltage power runs while keeping full foil shielding.Two 20 AWG stranded (7x28) ASTM bare...

West Penn 291 is one of the most widely used shielded pairs around: two 22 AWG stranded conductors under a full foil shield, ready for intercom, paging inputs, sensors and line-level audio.Two 22 AWG...

West Penn 373 carries three twisted pairs, one shielded and two unshielded, for systems that want a clean audio pair plus two pairs for data, call or control signals.Three twisted pairs of 22 AWG...

West Penn 290 is a single shielded twisted pair of 22 AWG solid copper, a classic for intercom, line-level audio and control signals that need to stay quiet next to power wiring.Two 22 AWG solid ASTM...