West Penn 292 steps up to a 20 AWG shielded pair, giving lower resistance for longer audio, control and low-voltage power runs while keeping full foil shielding.
Two 20 AWG stranded (7x28) ASTM bare copper conductors, twisted pair construction
Nominal DC resistance 10.5 ohms per 1000 ft
Polypropylene insulation, .008 in nominal thickness
West Penn 3011 is a four-conductor 20 AWG shielded cable that gives a little extra copper over 22 gauge while keeping full foil shielding, a good match for sensors, audio and control runs that...
West Penn 291 is one of the most widely used shielded pairs around: two 22 AWG stranded conductors under a full foil shield, ready for intercom, paging inputs, sensors and line-level audio.Two 22 AWG...
West Penn 294 is a 16 AWG shielded pair for runs that carry more current, such as powered speakers, low-voltage power to devices, or long audio lines that also need noise protection.Two 16 AWG...
West Penn Wire 222 steps up to 20 AWG stranded copper for runs that need a little less resistance than 22 gauge. This unshielded two-conductor riser cable suits low-voltage power and control circuits...
West Penn 359 gives you a shielded 20 AWG audio pair plus two unshielded 20 AWG conductors, helpful for longer intercom and sound runs where 22 gauge would drop too much voltage.Four 20 AWG stranded...
