Use this pipe ground clamp to create an electrical ground between a 1/2in-1in water pipe, copper water pipe or copper ground wire. Accommodates Ground wire size #2 str. to #10 str. Fits 1/2in to...

5/8" High-strength Bonding Ground Clamps

1/2" High-strength Bonding Ground Clamps

Please see either our 6" strap or 12" strap as an alternative. Manufacturer Discontinued Copper Ground Straps Provide low resistance ground

12" Galvanized Steel Ground Strap Suitable for 1/2"- 3" Diameter Pipe Part Number: SI-0958-12G Positive grounding connection to water pipes, electrical conduits and ground rods Features new...

C-Rural dead-ends are an inexpensive way of safely dead-ending one-pair aerial distribution wire to a drive hook, eye bolt or through bolt. Their design prevents the formation of corrosion pockets...

MULETAPE Series Woven Polyester Tape WP1800P 5000' Flat, woven, polyester tape used for installing fiber optic, copper, and coaxial cables in underground conduit. Lubricated for easy pulling and...

4049-R MS2 Splicing Tools Lite Rig Splice Kit New The 3M MS²™ 4049 Lite Rig is a lightweight portable splicing rig in a pail, which contains 4036-25 Hand Crimper and provides many features and...

3M710 Presser and Mounting Bar Kit Used When it comes to copper cable, good splices are absolutely critical to reliable connections—especially with the unprecedented demand that DSL and other...

3M710-TMK10A 710 Mounting Bar Kit A multi-piece set designed to mount and support all splicing tools on splicers boxes, pedestals or racking. 80-6110-4837-4 MS2 Bar kit 4045-SHSA

3M710-UTK25A 710 Unipresser Tool Splicing Rig When it comes to copper cable, good splices are absolutely critical to reliable connections—especially with the unprecedented demand that DSL and other...

3M MS2 4052T Tester Check Comb The check comb eliminates wiring errors by double-checking tip and ring placement prior to crimping and to insulate pairs when using the in-head tester without a cover.

4270-A MS2 Hand Presser Tool The 4270-A presser is used to plug up to seven Super Mate Modules together.

The 4051 tool is used on MS²™ Modules to replace conductors back into the module Wire Insertion Tool For MS2 modules 3M 80610072557

4047 3M Pair Test Plug MS2 The 4047 Pair Test Plug is a probe which permits pair contact without damaging wire insulation. The prongs fit into the test entry port and the adjustable clamp allows...

4053-PM MS2 Separation Tool for 4005-DPM/TR Modules The only recommended tool to separate MS²™ Super Mate 4005-DPM/TR Modules from any other module. Note: The 4053 Cover Removal Tool cannot be used...

The 4045 Universal Splicing head Support Assembly is designed to hold an MS²™ Splicing Head so it can be used in all applications.

The 4041 Splicing Head is the standard MS2™ Splicing Head without any support components. We usually have a good supply of used MS2 crimping tools in stock please call for our latest inventory.

The 4031 Hand Crimping Unit is lightweight and hand-operated. When the correct crimping pressure is reached, a bypass valve opens. We usually have a good supply of used MS2 crimping tools in stock...

Preformed Line Products 8000432 End Plate Removal Tool The End Plate Removal Tool is made of durable galvanized steel. It is specially designed to facilitate End Plate removal from the cable during...