West Penn Wire

West Penn 292 steps up to a 20 AWG shielded pair, giving lower resistance for longer audio, control and low-voltage power runs while keeping full foil shielding.Two 20 AWG stranded (7x28) ASTM bare...

West Penn 291 is one of the most widely used shielded pairs around: two 22 AWG stranded conductors under a full foil shield, ready for intercom, paging inputs, sensors and line-level audio.Two 22 AWG...

West Penn 373 carries three twisted pairs, one shielded and two unshielded, for systems that want a clean audio pair plus two pairs for data, call or control signals.Three twisted pairs of 22 AWG...

West Penn 290 is a single shielded twisted pair of 22 AWG solid copper, a classic for intercom, line-level audio and control signals that need to stay quiet next to power wiring.Two 22 AWG solid ASTM...

West Penn 3282 is a nine-conductor 18 AWG shielded cable for installations that need several heavier circuits, such as door hardware, readers and local power, travelling together under one shield.9...

West Penn 855 is a five-conductor 22 AWG stranded cable for control and signaling jobs that need one more wire than a standard quad. It works well for door hardware, sensors and instrumentation...

West Penn 3245 is a four-conductor 16 AWG shielded cable for powered devices and audio lines that need low resistance over distance, with a full foil shield to keep interference out.4 conductors of...

West Penn 3021 pairs six 18 AWG stranded conductors with an overall foil shield, built for long-distance reader runs and powered access control hardware that needs both copper and noise protection.6...

West Penn 3244 is a four-conductor 18 AWG shielded cable often used for long card reader runs and powered devices, where the heavier conductors cut voltage drop and the foil shield keeps the signal...

West Penn 3011 is a four-conductor 20 AWG shielded cable that gives a little extra copper over 22 gauge while keeping full foil shielding, a good match for sensors, audio and control runs that...

West Penn 3272 carries ten 22 AWG stranded conductors under an overall foil shield, giving you plenty of circuits for control panels, intercom stations and access control hardware in a single...

West Penn 3271 puts eight shielded 22 AWG conductors in one compact jacket, handy for readers with extra LED and buzzer leads, keypads and multi-signal control runs that need protection from...

West Penn 3270 is a six-conductor 22 AWG shielded cable and a staple for access control card readers. The overall foil shield and drain wire keep reader data clean on longer runs through busy...

West Penn 3241 wraps four 22 AWG stranded conductors in a full aluminum foil shield, making it a dependable choice for card readers, keypads and audio lines that run near noisy power or lighting...

West Penn 285 is the largest cable in the 18 AWG multi-conductor range, with twenty stranded conductors for big control trunks between equipment rooms, panels and field devices.20 conductors of 18...

West Penn 284 is a fifteen-conductor 18 AWG stranded cable for large control and low-voltage power installations where many heavier circuits need to share a single pull.15 conductors of 18 AWG...

West Penn 283 carries twelve 18 AWG stranded conductors for control systems that need plenty of circuits and plenty of copper, such as lighting control, irrigation and building automation runs.12...

West Penn 281 is a seven-conductor 18 AWG stranded cable, a good fit for gate operators, lighting control and low-voltage power distribution where several heavier circuits share one run.7 conductors...

West Penn 274 is a fifteen-conductor 22 AWG stranded cable for large control and instrumentation runs, where many circuits need to travel together between panels and field devices.15 conductors of 22...

West Penn 271 brings eight 22 AWG stranded conductors together for multi-zone alarm wiring, keypads and control panels, saving you from pulling several smaller cables to the same place.8 conductors...