8006318 Preformed Line Products Black Jack 25 Pair Closure

Preformed Line Products Black Jack
25 Pair and 50 Pair Splice
8006508, 8006318, 8006681

Effectively Protects Cable
The BLACK-JACK 25-Pair and BLACK-JACK� Plus 50-Pair Closures are filled with POLY-BEE� Sealant to provide long term
protection for direct buried cable splices (individual or modular connection). The sealant is designed to form a barrier to protect splices against the harsh elements
of nature.
The closure designs incorporate a water-block system that consists of a soft cable grommet and a gasket seam seal. The soft grommet is designed to effectively seal around cables within the accepted diameter range. The gasket seals the halves of the closure to further ensure protection.

Two Designs Available
The BLACK-JACK 25-Pair Cable Closure is available in both the traditional butt splice version and the in-line splice version. The 50-pair cable closure is designed to incorporate both butt and in-line capabilities with one design. The in-line version can be used for straight through or branch splice applications. Both designs offer the same reliable service, are easily re-entered and must be replaced
after re-entry.

No Resin Required
The one-piece closure shell is shipped with the entire water block system in place. The unit is pre-filled with POLY-BEE Sealant so there is no resin mixing required. Without resin, preparation time is greatly reduced. Set-up time is also eliminated. This means the closure can be buried immediately after installation. Working without resin eliminates toxic material concerns and inventory waste because shelf-life is never an issue. Fast, Easy Application
Several design features make installation easy. The hinge on the shell is flexible allowing the closure to be squeezed shut by hand. The flexible hinge is also helpful during re-entry.
The closing clamp which slides over the closure flanges has a V-notch on the back to make initial hand installation easier. A narrow horizontal slide along the closing clamp provides leverage to bring the halves together. The kit comes with bonding hardware that fits over the studs of the bond connectors to provide shield continuity. This bonding hardware also assures proper alignment of the cables in the closure.

8006508 25 Pair In-Line Splice $69.00
8006318 25 Pair Butt Splice $50.00
8006681 50 Pair In-Line Splice $98.00
Click on the price to order

25 pair and 50 pair splice closures