The West Penn D25430 is a two pair plenum audio snake for multichannel runs through ceiling spaces. Each pair has its own foil shield and drain, and FEP insulation keeps the cable slim and flexible.
Two 22 AWG stranded (7x30) tinned copper pairs
Teflon (FEP) insulation, twisted pair construction
Each pair shielded with 100% aluminum foil and a 24 AWG stranded drain wire
Flexible plenum jacket, nominal OD 0.218 in
Nominal impedance 55 ohms, velocity of propagation 69%
West Penn 25510B keeps two 22 AWG audio or control circuits apart with an individual foil shield on each pair, all in a plenum-rated jacket for runs above drop ceilings.Two twisted pairs of 22 AWG...
West Penn 25440B gives you two individually shielded 18 AWG pairs in a flexible plenum jacket, a good fit for longer audio, intercom and control runs through air-handling spaces.Two twisted pairs of...
West Penn 25441B carries three 18 AWG pairs, each with its own foil shield and drain, so three separate circuits can share one plenum cable without crosstalk.Three twisted pairs of 18 AWG stranded...
West Penn 25291B is a two-conductor 22 AWG stranded shielded cable built for the air-handling space above drop ceilings, where code calls for plenum-rated cable. It is a sound choice for intercom...
Running cable through a return-air plenum? West Penn 253271B is a 8-conductor 22 AWG stranded shielded cable with a low-smoke flexible plenum jacket that meets that requirement. It is a sound choice...
For plenum spaces, West Penn 25301B offers a 3-conductor 22 AWG stranded shielded cable rated to the NFPA 262 smoke and flame test. It is a sound choice for intercom stations, keypads, sensors and...
