West Penn D25350 is the plenum-rated version of West Penn's media control cable, with a shielded 22 AWG data pair and an 18 AWG power pair for control-system bus wiring above ceilings and in air-handling spaces. It cross-references to Crestron CRESNET P, Liberty LLINX-U-P and Extron 22-119-03.
Data pair: 22 AWG stranded (7x30) bare copper, foam FEP insulation, 100% aluminum foil shield with drain wire
Power pair: 18 AWG stranded (7x26) bare copper, polymer alloy insulation, unshielded
Nominal DC resistance: data 17 ohms, power 6.2 ohms per 1000 ft
Insulation colors: data pair blue/white, power pair red/black
Nominal capacitance 12.5 pF/ft between conductors, 22.5 pF/ft conductor to shield
Flexible polymer alloy jacket .015 in thick, nominal OD .206 in
NEC Type CMP, UL and cUL listed, meets 300V NEC requirements
Flame rating NFPA 262 smoke and flame test
Applications: communication bus, low-voltage power, media control circuits in plenum spaces
West Penn 77350 is a four-conductor media control cable that carries a shielded 22 AWG data pair and an 18 AWG power pair in one jacket, built for control-system bus wiring between touch panels,...
West Penn D441 is a three-pair 18 AWG cable with every pair individually shielded, so three separate audio or control circuits can share one jacket without crosstalk, even on longer runs.3 twisted...
West Penn D440 gives each of its two 18 AWG pairs its own foil shield and drain, keeping the circuits isolated from each other and from outside noise. It suits longer line-level audio and control...
West Penn 3653 is a four-pair 22 AWG cable with an overall foil shield, well suited to multi-circuit intercom, paging and access control wiring where interference is a concern.4 twisted pairs of 22...
West Penn 3654 bundles six twisted pairs of 22 AWG under a single overall foil shield, letting you route several audio, intercom or control circuits together in one shielded cable.6 twisted pairs of...
