The West Penn C210 is a heavy 10 AWG speaker cable built for large venues and long runs, where voltage drop starts to matter. Nylon jacketed conductors and a sunlight resistant PVC jacket mean it is rated for tray, outdoor use and direct burial.
Two 10 AWG stranded (65x28) bare copper conductors, black and white
PVC insulation with a nylon jacket on each conductor
Twisted pair construction
Sunlight resistant PVC jacket, nominal OD 0.357 in
NEC Type TC (tray cable) or CL2, UL listed, meets 600V Class 1
West Penn Wire 226 brings heavy 14 AWG stranded copper to long speaker runs and low-voltage power feeds where voltage drop matters. It carries CL3R and FPLR riser ratings, giving installers...
West Penn Wire 227 is the heavyweight of the two-conductor range: 12 AWG stranded bare copper for the longest speaker runs and low-voltage power feeds. With a nominal DCR of just 1.7 ohms per 1000...
West Penn Wire 224 is the classic 18/2 workhorse for commercial sound and background music systems. Two 18 AWG stranded bare copper conductors with polarity-marked insulation keep speaker hookups...
West Penn Wire 225 is a 16 AWG two-conductor speaker cable for longer or higher-power runs where 18 gauge would waste too much signal. Fine 19x29 stranding keeps it pliable, and the riser rating...
Running cable through a return-air plenum? West Penn 25222B is a two-conductor 20 AWG stranded cable with a low-smoke flexible plenum jacket that meets that requirement. It is a sound choice for...
Running cable through a return-air plenum? West Penn 25227B is a two-conductor 12 AWG stranded cable with a low-smoke flexible plenum jacket that meets that requirement. It is a sound choice for...
