TRENDnet TPE-3012LS 12 Port Gigabit PoE+ Smart Surveillance Switch

TRENDnet TPE-3012LS 12 Port Gigabit PoE+ Smart Surveillance Switch

The TRENDnet TPE-3012LS is built for IP camera systems, with eight Gigabit PoE+ ports, two Gigabit ports and two SFP slots, sharing a 110W budget. PoE+ can be extended to 200m (656 ft) at 10Mbps for distant cameras.

A front-panel LED display shows PoE power use at a glance, and a surveillance-mode GUI simplifies setup and monitoring. It also supports VLANs, QoS, LACP, IGMP snooping and IPv6. 1U rackmount.

Key Features

• 8 x Gigabit PoE+ ports
• 2 x Gigabit ports
• 2 x SFP slots
• 110W PoE power budget
• Easy-to-use web-based management interface
• Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
• Extend PoE+ signal up to 656 ft./200m at 10Mbps
• Front panel 4-digit LED display provides PoE power statistics
• Surveillance mode GUI for simplified configuration and network monitoring
• Device discovery for ONVIF compliant IP cameras and NVRs
• Upload building floorplans to create an E-map of surveillance devices
• Change IP camera IP address settings
• Upgrade IP camera firmware
• Change IP camera administrator user name and password
• Bandwidth control per port
• 802.1Q, MAC, Surveillance, and Voice VLAN support
• IEEE 802.1p QoS with queue scheduling support
• 24Gbps switching capacity
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1s; IEEE 802.1w; IEEE 802.1X; IEEE 802.1ab; IEEE 802.3; IEEE 802.3u; IEEE 802.3x
• Device Interface: 8 x Gigabit PoE+ ports; 2 x Gigabit ports; 2 x 100/1000Mbps SFP slots; LED indicators; 4-Digit PoE LED display (total power budget, available power, consumption per port)
• Data Transfer Rate: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit Ethernet: 2000Mbps (full duplex)
• Performance: Switch fabric: 24Gbps; RAM buffer: 512KB; MAC address table: 8K entries; Jumbo frames: 10KB; Forwarding mode: store and forward; Forwarding rate: 17.8Mpps (64-byte packet size)
• Management: HTTP / HTTPS web-based GUI – Standard or Surveillance Mode; CLI command line interface (Telnet / SSHv2); SNMP v1, v2c, v3; IPv4/IPv6 support; Multiple user accounts; Dynamic/static unicast MAC address table; Enable or disable 802.3az power saving per port; Syslog; System message logging severity levels; Port mirroring (transmit, receive, one-to-one, many-to-one)
• Spanning Tree: STP (spanning tree); RSTP (rapid spanning tree); MSTP (multiple spanning tree)
• Link Aggregation: Static link aggregation and dynamic LACP (Up to 8 groups)
• Quality of Service (QoS): 802.1p Class of Service (CoS); DSCP (Differentiated Services Code Point); Bandwidth limit per port; Queue Scheduling: strict priority (SP), weighted round robin (WRR)
• VLAN: Multiple management VLAN assignment; 802.1Q Tagged VLAN; MAC-based VLAN; Surveillance VLAN; Voice VLAN; Up to 256 VLAN groups, ID Range 1-4094
• Multicast: IGMP Snooping v2/v3; IGMP immediate/fast leave; IGMP querier; Dynamic/static multicast MAC address table; MVR (Multicast VLAN registration); Up to 1K multicast entries
• Surveillance Mode (ONVIF): Surveillance mode GUI for simplified configuration and network monitoring; Device discovery for ONVIF compliant devices such as IP cameras and NVRs; Upload floor plans to create a visual overview of the network; Change camera IP address configuration; Upgrade IP camera firmware; Change IP camera administrator user name and password
• PoE: PoE budget: 110W; 802.3at: up to 30W per port (ports 1-8); PoE Mode A: Pins 1,2 and pins 3,6 for power; PoE power scheduling; PD alive check; Over current/short circuit protection
• Power: Input: 100 – 240V AC, 50/60Hz, internal power supply; Max. consumption: 10W (No PoE load)
• Surge Protection: 6kV (Ports 9 & 10)
• Fan/Acoustics: Fanless
• Operating Temperature: 0° – 40° C (32° – 104° F)
• Dimensions: 330 x 230 x 44.45mm (12.9 x 9.1 x 1.75 in.); 1U rack mountable
• Weight: 2.26kg (4.98 lbs.)