The TRENDnet TPE-104GS lets a non-PoE device run off a PoE network connection up to 100m (328 ft) away. It splits an IEEE 802.3af PoE signal into separate Gigabit data and DC power outputs.
A DIP switch sets the output to 5V, 9V or 12V to match the device, and the included jumper cable has both 5.0mm and 3.5mm plugs for wider compatibility. Ideal for powering IP cameras, access points or small devices where there is no outlet nearby.
Key Features
Power a non-PoE device up to 100 meters (328 ft.) away
Splits a gigabit PoE signal into separate power and gigabit data sources
Adjustable voltage output supports 5V, 9V, or 12V devices
Use this compact device with PoE switches or injectors
Device Interface: 1 x Gigabit data/power port in; 1 x Gigabit data out port; 1 x DC Power out port; LED indicators; Adjustable output power DIP switch (5V, 9V, 12V)
Data Transfer Rate: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit: 2000Mbps (full duplex)
TRENDnet TPE-113GI Gigabit PoE Injector 15.4WThe TRENDnet TPE-113GI adds standard PoE (15.4W) to a non-PoE Gigabit switch port, sending data and power over one cable to a device up to 100m (328 ft)...
TRENDnet TPE-114GI Gigabit PoE+ Injector 30WThe TRENDnet TPE-114GI converts a non-PoE Gigabit port into a PoE+ port, delivering up to 30W along with data to a device up to 100m (328 ft) away. It...
TRENDnet TPE-116GI Gigabit 60W PoE++ InjectorThe TRENDnet TPE-116GI delivers up to 60W of PoE++ power with Gigabit data, supporting PoE, PoE+ and 802.3bt devices up to 100m (328 ft) from a non-PoE...
TRENDnet TPE-117GI Gigabit 60W PoE++ InjectorThe TRENDnet TPE-117GI turns an open port on a non-PoE switch into a Gigabit PoE++ port with up to 60W of power. Auto-sensing supplies PoE (15.4W), PoE+...
TRENDnet TI-SG104 Industrial Gigabit PoE++ SplitterThe TRENDnet TI-SG104 is an industrial Gigabit PoE++ splitter that separates a 90W PoE++ feed into data and DC power, so you can run a non-PoE...
