TRENDnet TI-S24052 240W 52V DC Industrial DIN Rail Power Supply with PFC

TRENDnet TI-S24052 240W 52V DC Industrial DIN Rail Power Supply with PFC

The TRENDnet TI-S24052 provides up to 240W (52V DC, 4.61A) for industrial PoE switches, injectors and wireless gear, with output adjustable between 48 and 56V DC. It mounts on a TS-35 DIN rail and is convection cooled.

Active PFC (PF above 0.98) and 94% efficiency reduce wasted power, with 150% peak load capability and full protection against overload, short circuit, over voltage, over current and over temperature. UL 508 approved, with a DC OK relay and a -25 to 70 C (-13 to 158 F) rating.

Key Features

• Industrial power supply with integrated DIN-Rail mount
• Provides up to 240W of power (52V DC, 4.61A)
• Supported output voltage 48 – 56V DC
• High efficiency 94% and low power dissipation
• 150% peak load capability
• Built-in active Power Factor Controller (PF > 0.98)
• Cooling by natural air convection
• Protections: Overload, short circuit, over power, over voltage, over current, over temperature
• UL 508 approved
• Built-in DC OK relay contact
• -25° – 70° C (-13° – 158° F) wide operating temperature range
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Interface: Input: 90 – 264V AC, 47 – 63Hz, 3.15A 127 – 370V DC; Output: 240W, 48 – 56V, 0 – 4.6A; DIN-rail: TS-35/7.5 or 15
• Housing: DIN-rail mount; Power LED indicator
• Special Features: DC OK relay contact; 150% peak load capacity; Protection functions; Short circuit; Over power; Over voltage; Over current; Over temperature; Protection type: shutdown and self-recovery
• Operating Temperature: -25° – 70° C (-13° – 158° F)
• Dimensions: 63 × 124 × 114mm (2.5 x 4.9 x 4.5 in.)
• Weight: 844g (1.86 lb.)