TRENDnet TI-PG160 16 Port Hardened Industrial Gigabit PoE+ DIN Rail Switch

TRENDnet TI-PG160 16 Port Hardened Industrial Gigabit PoE+ DIN Rail Switch

The TRENDnet TI-PG160 delivers 16 Gigabit PoE+ ports with a 240W total PoE budget and 32Gbps of switching capacity, letting one DIN-rail switch power and connect a large group of cameras, phones or access points.

It is built into an IP30 metal housing that operates from -40 to 75 C (-40 to 167 F). Redundant power inputs with overload protection and an alarm output on power failure support fault-tolerant designs. DIN-rail and wall mounts are included; compatible supplies are the TI-S24052, TI-S24048 and TI-S48048 (sold separately).

Key Features

• 16 x Gigabit PoE+ ports
• 240W PoE power budget
• 32Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° - 75° C (-40° - 167° F)
• Redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-S24052, TI-S24048, TI-S48048)
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.3; IEEE 802.3u; IEEE 802.3ab; IEEE 802.3x; IEEE 802.3af; IEEE 802.3at
• Device Interface: 16 x Gigabit PoE+ ports; 6-pin removable terminal block; LED indicators; DIN-Rail mount; Wall mount; Grounding point
• Data Transfer Rate: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit: 2000Mbps (full duplex)
• Performance: Data RAM Buffer: 512KB; Switching Fabric: 32Gbps; MAC Address Table: 8K entries; Jumbo Frame: 9KB; Forwarding rate: 23.8Mpps (64-byte packet size)
• Special Features: Hardened components rated for extreme temperatures; Redundant power inputs; ESD contact 6kV, air 8kV, and surge 2kV support; Low-profile design
• DC Power: Input: 48 - 56V DC; Recommended power supply: TI-S24052, TI-S24048 (sold separately); Max. consumption: 5.76W (no PoE)
• Optional Power Adapter (48VDC3000 sold separately): Input: 100 - 240V AC, 50/60Hz, 2A; Output: 48V DC, 3.34A 160W max.
• PoE: PoE budget: 240W
• Terminal Block: Redundant power inputs, alarm relay contact, 6 pin; Wire range: 0.34mm^2 to 2.5mm^2; Solid wire (AWG): 12-24/14-22; Stranded wire (AWG): 12-24/14-22; Torque: 5 lb. - In / 0.5Nm / 0.56Nm; Wire strip length: 7-8mm
• Alarm Relay Contact: Relay outputs with current carrying capacity of 1A, 24V DC; Open circuit mode when two power sources are connected; Short circuit mode when only one power source is connected
• MTBF: 699,103 hours
• Housing: IP30 metal case; DIN-rail mount; Wall mount; Grounding point; 6kV contact protection; 8kV air protection; 2kV surge protection
• Operating Temperature: -40° - 75° C (-40° - 167° F)
• Operating Humidity: Max. 95% non-condensing
• Dimensions (L x W x H): 155 x 120 x 48mm (6 x 4.7 x 1.9 in.)
• Weight: 500g (17.7 oz.)
• Certifications: CE; FCC; Shock (IEC 60068-2-27); Freefall (IEC 60068-2-32); Vibration (IEC 60068-2-6)
• Warranty: Lifetime Warranty

Package Contents

• TI-PG160
• Quick Installation Guide
• Removable terminal block
• DIN-rail and wall mount kit

TRENDnet part number TI-PG160.