TRENDnet TI-BEP200 2 Port Industrial Outdoor Gigabit Active Passive PoE+ Extender

TRENDnet TI-BEP200 2 Port Industrial Outdoor Gigabit Active Passive PoE+ Extender

The TRENDnet TI-BEP200 takes a single PoE++ feed and extends it another 100m (328 ft) to two devices, for up to 200m (656 ft) from the source. One output is standard PoE+ and the other is selectable 24V or 48V passive PoE, handy for mixed equipment such as older wireless radios.

Daisy chain up to four units to reach 500m (1,640 ft). It needs no external power adapter, includes 4kV surge protection and uses an IP67 wall-mountable housing rated from -40 to 75 C (-40 to 167 F).

Key Features

• Easy installation
• Extends 100m for a total distance of up to 200m (656 ft.)
• Daisy chain up to 4 units for a total PoE network extension of up to 500m (1,640 ft.)
• Use a single PoE++ connection to extend PoE for up to two devices
• Supports PoE (15.4W), PoE+ (30W), and Passive PoE (24-48V) devices
• Supports single output Passive PoE (24-48V)
• Wide operating temperature range of -40°– 75° C (-40° – 167° F)
• IP67 outdoor weather rated housing
• No external power adapter required
• Built-in True Surge 4kV Protection
• Wall mountable
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.3; IEEE 802.3u; IEEE 802.3x; IEEE 802.3ab; IEEE 802.3af; IEEE 802.3at; IEEE 802.3bt
• Device Interface: 1 x Gigabit PoE++ in port; 1 x Gigabit PoE+ out port; 1 x Gigabit 24/48V DC passive PoE out port; LED indicators; Wall mount; IP67 housing
• Data Transfer Rate: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex); Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex); Gigabit: 2000Mbps (full duplex)
• Performance: RAM buffer: 1Mb; MAC Address Table: 2K entries; Jumbo Frame: 9KB
• Special Features: Extends a PoE/PoE+ network connection an additional 100 meters for a total distance of up to 500m (1640 ft.); Cascade up to 4 repeaters
• Power: Powered by PoE++ (60W – 90W) Device; Max. consumption: 3.9W (without device connected)
• PoE: PoE budget: 60W; PSE Pin: 1,2 (V-), 3,6 (V+), 4,5 (V+), 7,8 (V-)
• DIP Switch: Adjust 24/48V DC passive voltage (default 48V DC)
• Operating Temperature: - 40° – 75° C (-40° – 167° F)
• Dimensions: 167 x 74 x 44mm (6.6 x 2.9 x 1.7 in.)
• Weight: 266g (12.9 oz.)