TRENDnet TEW-740APBO2K N300 Outdoor PoE Preconfigured Point to Point Bridge Kit

TRENDnet TEW-740APBO2K N300 Outdoor PoE Preconfigured Point to Point Bridge Kit

The TRENDnet TEW-740APBO2K includes two outdoor N300 access points that come preconfigured as a wireless bridge, an easy way to link two buildings without running cable.

Each unit has a 10dBi directional antenna and an IP56 weather-rated housing, and PoE power adapters are included.

Key Features

• Wireless N300 point-to-point networking (2.4 GHz)
• Includes two preconfigured wireless N access points
• IP56 outdoor weather rated housing
• Built-in 10 dBi directional antenna
• Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
• Proprietary PoE power adapters included
• 1 x 10/100Mbps PoE-in port, and 1 x 10/100Mbps port
• NDAA / TAA compliant (U.S. and Canada only)

Specifications

• Standards: IEEE 802.3; IEEE 802.3u; IEEE 802.1d; IEEE 802.1p; IEEE 802.1Q; IEEE 802.1X; IEEE 802.11d; IEEE 802.11e; IEEE 802.11f; IEEE 802.11h
• Hardware Interface: 1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length 60m (197 ft.)); 1 x 10/100Mbps LAN2 port; LED indicators; Reset button; Grounding Point
• Special Features: IP56 weather rated; 802.1Q VLAN assignment per SSID; Schedule radio on/off time policy; 802.11r / 802.11k fast roaming; Preconfigured point-to-point bridge kit
• QoS: WMM
• Operation Modes: Access Point (AP); Access Point (AP) + WDS; Wireless Distribution System (WDS); WISP (CPE) + AP; Client Bridge + AP; Router; Control AP (CAP)
• SSID: Up to 7 SSIDs
• Internet Connection Types (WISP (CPE) + AP & Router modes): Dynamic IP (DHCP); Static IP (Fixed); PPPoE (Dynamic IP/Static IP); PPTP (Dynamic IP/Static IP)
• Management/Monitoring: Local/remote web-based management (HTTP, HTTPS); Local/remote CLI based management (Telnet, SSH); SNMP v2c/v3; SNMP Trap; Upgrade firmware; Backup/restore configuration; Event logging; Authentication log; Reboot; Restore to factory defaults
• Antenna Gain: 10 dBi internal sector antenna
• Power: Input: 100 – 220V AC, 50/60Hz, 0.5A; Output: 12V DC, 1A proprietary/passive PoE injector; Max. Consumption: 6.6W
• Operating Temperature: -22° – 60° C (-7.6° – 140° F)
• Dimensions: 195 x 118 x 61mm (7.6 x 4.6 x 2.4 in.) per access point
• Weight: 304g (10.7 oz.) per access point