TRENDnet TC-NT2 Network Cable Tester for Ethernet Phone and Coax

TRENDnet TC-NT2 Network Cable Tester for Ethernet Phone and Coax

The TRENDnet TC-NT2 is a two-piece cable tester for checking Ethernet, telephone, coax (BNC) and patch panel runs. It identifies good, open, shorted and cross connected pins on cables up to 300m (984 ft.) and tests the ground on shielded cable.

The transmitter handles loop tests at the bench, while the remote receiver lets you test runs that terminate in different rooms. Continuous and manual scan modes are available, and a built-in tone generator works with a standard tone probe for tracing cables. BNC to RJ-45 adapters and a carry pouch are included.

Key Features

• Tests RJ-45, RJ-11/12, coax (BNC) and token ring cabling
• Checks cable lengths up to 300m (984 ft.)
• Finds open, short and crossed pins
• Tests shield grounding on screened cable
• Remote receiver for testing cables between rooms
• Continuous and manual scan modes
• Built-in tone generator for tracing with a tone probe
• NDAA compliant

Specifications

• Test standards: 10/100/1000BASE-T, 10BASE-2, EIA/TIA-568A/568B
• Compatible cables: Cat3 through Cat7, coax; USB and 1394 with optional TC-NTUF
• Tone frequency: 600 - 800Hz
• Power: 9V battery (not included)
• Dimensions: Transmitter 117 x 67 x 27mm, receiver 117 x 32 x 27mm
• Weight: Transmitter 108g (3.8 oz.), receiver 44g (1.6 oz.)
• Warranty: 1 year limited

In the Box: TC-NT2 transmitter and receiver, 2 x RJ-45 to BNC adapters, network patch cable, carry pouch, quick installation guide

TRENDnet part number TC-NT2. UPC 710931401011.