Telescoping Gopher Pulling Pole 2' - 16' Telescoping "gopher" pulling pole available for use in long spans and in hard to reach areas in ceilings, floors and crawl spaces. Features: Very light and easy to carry 1" diameter, 2' long collapsed - 16'...

Please see SKU 300-655 Punch Down Tool with adjustable high/low actuation Can be used for punch only or punch and cut Comes with both 66 & 110 blades. Stores extra blade in the base

The ETR1000 provides 1000VA of uninterruptible power at 600 Watts. Mfg, Discontinued Replaced with the ETR1000LGU Features Full feature boost/buck voltage regulation Battery backup SentryPlus software Enhanced features Larger capacityies Lower...

EN350 MINUTEMAN UPS EnSpire 350 VA Mfg discontinued please see EN450 as a replacement. Applications Low capacity applications Desktop/Laptop workstations Small Key Systems VoIP Handsets Small Security/CCTV installations EnSpire...

Fiber Light Source 650NM excellent for locating faults in MM or SM fiber. Can be used for 2.5mm ST or SC connectors. Features: Low-Cost and Streamline - The VFL Series is a low-cost, streamline basic fiber test tool which is easy to handle and easy...

Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra...

Please see PS240 as a replacement. The Bogen Gold Seal Series amplifiers were designed with the sound contractor in mind. They provide extensive flexibility and versatility, without the need for add-on modules. The GS250 model enhances the Gold Seal...

The Gold Seal Series amplifiers are designed to meet the rigorous requirements of today's sophisticated sound systems. They combine unique and useable features with ultra high reliability and professional performance. The amplifiers are available in 35,...

Features: High-Performance Data Communications Cable Designed for Indoor Installations Excellent Attenuation and Crosstalk Characteristics ETL | CMP | TIA |

Telephone Line 1 Line 2 Splitter 267C See 300-324 We have these in stock and they will do the samething. Split a 4 conductor 2 line telephone jack into Line 1 and Line 2 Allows use of one line for phone and the 2nd line for fax UL Approved 267C...

66 Block with 50 pin Male Telco Connector on One Side Because of lack of sales we are stocking blocks with just female connectors.  The female was always the more popular connector on the block.  We have the male Amphenol cables to match...

66 Split Block 50 pin Male Telco Connector on Left & Right Side Because of lack of sales we are stocking blocks with just female connectors.  The female was always the more popular connector on the block.  We have the male Amphenol cables...

Features: Vertical cable management for the front of a rack Brackets are on one side only for a left or right side rack attachment. Equipped with feed-through holes on the back side for easier cable routing from front to back or back to...

Features: Vertical cable management for the front and back of a rack Brackets are on one side only for a left or right side rack attachment. Equipped with feed-through holes on the back side for easier cable routing from front to back or back to...

12" Mille-Tie Reusable Cable Tie for Category Cables Fiber Plenum Red Mille-Tie is a quick-fit fastener for primary use in data cabling installations The 12" (305mm) long strips are made from high-grade polyurethane which imparts both strength and...

12" Reusable Cable Tie for Category Cables and Fiber 100/pk Mille-Tie is a quick-fit fastener for primary use in data cabling installations The 12" (305mm) long strips are made from high-grade polyurethane which imparts both strength and flexibility to...

Keep dust and other debris away from your critical equipment through use of our SECURE series filter set. These replaceable filters are installed inside the locking lid in front of the cooling holes on the front and sides.

Need a place to install non-rackmountable telecom devices, then our plywood insert should fit the bill. This plywood insert is mounted to standoffs on the inside of the backplate. All mounting hardware is included.

MINIRAQ Secure Series 10U Fan Tray Designed for maximum airflow and heat removal, the 10U fan tray is the perfect complement to a 10U SECURE Compact or Tall MiniRaQ enclosure. This fan tray features dual fan units and can easily be added in the field to...

Four 4 Post Open Steel Racks 28U to 48U UL Unassembled These are Flat Pack Racks onsite assembly is required. Features: Standard open frame rack equipped with 19” format mounting posts. U shaped rails 3″x1 1/4″ tapped both front...