The Bogen Model S86 8" cone-type loudspeakers provides excellent sound quality and trouble free operation. The magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response...

The Bogen SPT15A is a compact, high intelligibility, reentrant type loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial...

The Bogen SPT5A is a compact, reflex horn-type loudspeakers, designed for one-way or two-way sound and communications systems.Their wide frequency response assures full-range background music reproduction, making these loudspeakers an excellent choice...

The Bogen SPT30A is a compact, high intelligibility, reentrant type loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial...

The Bogen KFLDS30T is a wide dispersion, high-intelligibility, reentrant-type horn loudspeaker designed for applications where wide angle projection and directivity is a necessity. The flare-shaped horn can be rotated to project wider dispersion in...

The Bogen SM1EZ Easy Install ® Speaker is surface-mount speaker, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools.First, two specially-designed studs pierce the ceiling tile...

Maximum speaker power 15W Single-tap design Stepped attenuator volume control For 70V systems Tilt & swivel base for easy aiming All metal construction with enamel finish Weatherproof design

Maximum speaker power 7WSingle-tap designStepped attenuator volume controlFor 70V systemsTilt & swivel base for easy aimingAll metal construction with enamel finishWeatherproof design

The Bogen CS1EZ is a pre-assembled 1-watt single-tap ceiling speaker designed for use with 70V amplifier systems.Comprised of an eight-inch cone speaker and 13” diameter steel ceiling grille finished with white enamel, the CS1EZ includes a rear-mounted...

Fast, easy, clean installationDirect and reflected sound paths create wide dispersion angleLightweight and durable plastic shell with a paintable off-white finishComplies with NFPA National Code 160b and UL-2043SM1EZ Design InformationFor 25V and 70V...

Tile Bridge is a load-bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Distributes weight of speaker and grille onto ceiling grid 23-3/4" W x 3/4" H x 14-1/2"...

Protective steel enclosure  Seismic tabs allows suspension of speakers from building's structure  Foam insert improves audio performance  12-1/4" dia. x 4-1/2" D

Supports weight of speakers installed in suspended ceilings  Use with clamping type ceiling speakers 17" W x 1-1/8" H x 24" D

Control up to 10W of speakers 10-position settings plus "OFF"  Allows local control of a group of speakers, without altering amplifier volume setting For 25V and 70V systems 2-7/8" W x 4-5/8" H x 2-1/2" D

Control up to 35W of speakers  10-position settings plus "OFF"  Allows local control of a group of speakers, without altering amplifier volume setting  For 25V and 70V systems  4-3/4" W x 4-3/4" H x 3" D

Hi-Z, 10k-ohm primary impedance  Lo-Z, 600-ohm secondary impedance, balanced with center tap  Matches high-to-low impedance or low-to-high impedance  Adapts line-level signals to microphone inputs RCA connector for Hi-Z side  Screw...

The Bogen PCM2000 is a modular telephone zone paging and control system. By integrating unique, multi-function modules, the PCM2000 offers both incredible flexibility and capability for future expansion. The Bogen PCM2000 Zone Paging System is designed...

The PCMTIM telephone interface module incorporates a universal interface so that connection to any telephone system is rapid and trouble-free. The module connects to the telephone system via a standard RJ11 plug and is programmed simply by using common...

12V DC @ 1.5A  2-5/8" H x 3-3/8" W x 2-3/4" D  Plug-in

The PCMZPM zone paging module can operate high-power or low-power paging systems (only one type per PCMZPM module). For high-power paging, a single amplifier can be used for paging and supplying background music (when not paging). Background music can...