6 Amp Access Control Power Supply for Magnetic Locks etc 12V/24V UL 294, NFPA101 and MEA listed Metal enclosure accommodates batteries, (2) - 12 VDC/12 AH batteries, not included Latching fire alarm tie-in with reset Trigger Connections 12 or 24V...

3 Amp Access Control Power Supply for Magnetic Locks etc 12V/24V UL 294, NFPA101 and MEA listed Metal enclosure accommodates batteries, (2) - 12 VDC/12 AH batteries, not included Latching fire alarm tie-in with reset Trigger Connections 12 or 24V...

AL400ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or...

StrikeIt1 will operate up to two (2) 24VDC panic hardware devices simultaneously. It is designed to handle the high current surge panic hardware locking devices demand. Each lock output has an adjustable relock delay timer. It will control a pair of...

SMP5PMCTX supervised power supply/charger converts a 115VAC/230VAC, 50/60Hz input into a regulated 12VDC or 24VDC output @ 4 amp continuous supply current.

SMP3 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

AL602ULADA are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA...

AL600ULXPD16 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into sixteen (16) 12VDC or 24VDC non power-limited outputs. Input: Input 115VAC, 60Hz, 3.5 amp. Output: 12VDC or 24VDC selectable output. 6 amp continuous supply...

AL600ULX is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Input: Input 115VAC, 60Hz, 3.5 amp. Output: 12VDC or 24VDC selectable output. 6 amp continuous supply current. Filtered and...

The AL600ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. Outputs are activated by an open collector sink or normally open...

Altronix 8 Fused Outputs Power Supply/Access Power Controller 12/24VDC @ 6A. AL600ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply...

AL400ULX is a power supply/charger that converts a 115VAC/60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output. Input: Input 115VAC, 60Hz, 3.5 amp. Input fuse rated @ 3.5 amp/250V. Output: 12VDC or 24VDC selectable output...

AL400ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4 amp @ 12VDC or 3 amp @ 24VDC continuous supply current. Outputs are activated by an open collector sink...

AL300ULX is a power supply/charger that converts a 115VAC/60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output. Input: Input 115VAC, 60Hz, 3.5 amp. Input fuse rated @ 3.5 amp/250V. Output: 12VDC or 24VDC selectable output...

AL175ULX is a Two (2) Output Switching Power Supply/Charger that converts a 115VAC 60Hz input, into two (2) individually PTC protected 12VDC or 24VDC outputs.   Input: Input 115VAC, 60Hz, 0.6 amp. Access control trigger input. Output: 12VDC or...

AL125UL is a Two (2) Output Switching Power Supply/Charger that converts a 115VAC 50/60Hz input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

AL1024ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry...

AL1024ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry...

Model AL1012ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC non power limited fuse protected Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. The fire alarm disconnect feature enables...

1 Amp Access Control Power Supply for Magnetic Locks etc 12V/24V UL 294, NFPA101 and MEA listed Metal enclosure accommodates batteries, (1) 12 VDC/7 AH battery or (2) - 12 VDC/4 AH batteries, not included Latching fire alarm tie-in with reset 12 or...