The TOGGLER® SnapSkru® anchor is the industry's first self-drilling drywall anchor that does NOT destroy the drywall when using the anchor.
It is a true anchor, not just a small screw in a big screw like our competition! When activated with a screw, the SnapSkru anchor opens with an audible "pop", locking the anchor on the wall.
The drywall gypsum and its paper are kept in compression and thereby immediately reinforced. The SnapSkru anchor significantly outholds all other self-drilling drywall anchors by more than 60% in 1/2" drywall, and by more than 80% in 5/8" drywall.
It has a built-in positive stop that prevents overdriving the anchor when using a screw gun. The SnapSkru anchor is even vibration and shock resistant.
20All-Purpose 1/4" Anchors
20 #10 x 1-1/2" Screws
Holds up to 69lbs in 1/2" Drywall
Holds up to 675lbs in Concrete Block
The ALLIGATOR solid-wall anchor is the only anchor that...
The ALLIGATOR solid-wall anchor is the only anchor that extrudes the entire length of the screw.
The screw extrudes and compresses the anchor polymer into the wall of the hole under tremendous...
100 TOGGLER 1/4" Snaptoggle Only 24014 with Screws
Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors
TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw gun...
50 TOGGLER 1/4" Snaptoggle 25014 with Screws
Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors
100 Pack
TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw...