Greenlee LC2000SCUPCSM Launch Box Cable 2000M SM SC UPC
Eliminate OTDR Dead Zones: OTDR pulse widths are suppressed
Typically the technician will use a launch cable on the input and output connectors of the fiber under test. This allows the technician to characterize the insertion and return loss of the input and output connectors of a fiber link. Using a launch cable at the beginning of the fiber under test will allow the technician to measure all events directly after the OTDR bulkhead during troubleshooting procedures.
It is recommended that a one meter patch cord is used at the 930XC OTDR bulkhead to protect the OTDR bulkhead from damage. Please refer to the application note “Using a one meter Jumper at the bulkhead”.
Each launch cable is supplied in a soft carry case for convenient and safe storage