The LDB-2 Ring/Loop Detector monitors an analog phone line for ringing or an in-use condition. A built-in relay can be activated when either of these conditions are detected. This is ideal for monitoring line status or for providing a visual indication of such.
When monitoring for ring, an internal pot can be adjusted to allow the relay closure to stay on steady, or follow standard ring cadence.
The LDB-2 comes complete with a 12 VDC power adapter, and can also provide 12V DC power through its auxiliary 12V DC output terminals.
Detects ring voltage and loop connect
Screw terminal connections
Wall mountable with foam tape (included) or screws (not included)
Auxiliary 12V DC output
Adjustable time-out for relay closure
Two sets of relay contacts provided
Selectable NO (normally open) or NC (normally closed) relay contacts
The E-10A and E-20B are telephone line powered entry phones designed to provide two-way handsfree communication. Both function identically, but are available in two different housings to better suit...
The E-10A and E-20B are telephone line powered entry phones designed to provide two-way handsfree communication. Both function identically, but are available in two different housings to better suit...
IR Kit with 1 Bar Receiver and 4 Emitters with Contact Closure
Advanced IR kit allows control of not just A/V devices but any other device with a contact closure. Curtains, lights etc...
The M2W is designed to amplify the paging announcements and ringing tones of key system telephone speakers in noisy areas. The M2W can also be used to boost the paging capacity of other paging...
2" Loop Size Wood Screw Thread Bridle Ring
These 2” cable loop wood screw thread bridle rings are installed on wooden beams and studs to support communications cables and other low voltage wires...
