Dyna-Blue® Lubricant is a clean, slow-drying, easy-to-apply gel lubricant. It is a thick gel with "clingability" for easy handling and application. Dyna-Blue® combines effectiveness with economy. It is a good lubricant for everyday use in general electrical applications.

Dyna-Blue® Lubricant is harmless to humans, environmentally safe, compatible with cable jacket materials and exceptionally easy to work with. Dyna-Blue® is UL listed.

• Clean--Easy to Use

• Safe--Use With All Cables

• Temperature Stable--No Waste

• Lower Cost

• Stays Slippery--Won't Dry Out

• UL and CSA Listed

1. Lubricity: PVC or XLP-jacketed cable on PVC conduit at 200 lbs/ft (2.9 kN/m) normal pressure coefficient of dynamic fiction <.15 PVC or XLP-jacketed cable on EMT conduit at 200 lbs/ft (2.9 kN/m) normal pressure; coefficient of dynamic friction <.15
2. Percent non-volatile solids: 2.5 to 3.5%
3. Appearance: Thick, light-blue gel material
4. Wax, grease and silicone content: none
5. Temperature use range: 20°F to 140°F (-5°C to 60°C)
6. pH: 6.5 to 7.5
7. Cable compatibility: No deleterious effects on physical or electrical properties of cable jackets.
8. Polyethylene stress cracking: No stress cracking on LDPE cable jacket when tested by ASTM D1693.
9. Cling factor: Six inches (15 cm) of a one-inch (2.5 cm) diameter cable will hold at least 75 grams of lubricant for one minute when held vertically (at 70°F/20°C).
10. Temperature stability: No more than 10% change in Brookfield viscosity from 40°F to 100°F (5°C to 38°C). No phase-out after five freeze/thaw cycles or 24-hour exposure at 120°F (50°C).
11. Toxicity: Non-toxic and non-sensitizing. Industrial use only.
12. Cleanup: Complete cleanup possible with water.
13. Flammability: Lubricant has no flash point and dried residue is non-flammable.