RapidRun™ Runners™ - Making Hassle-Free Installation a Reality

Imagine pulling a VGA cable through a 3/4” conduit with a 90° sweep – and not worrying about all those small pins when you’re done. Imagine switching the installed cable from VGA to component video or switching from DVI™ to HDMI™ in less than a minute. Never before has there been an interconnect system that offered such adaptability. Until now.

The RapidRun™ Runner™, the core cable of the RapidRun system, makes each of these scenarios a reality. The advanced technology of the RapidRun system makes installation of the Runner easier and more flexible than traditional ways of running cable. Each Runner features the RapidRun connector which makes termination after installation quick and easy. Every Runner also includes two protective end caps with eye-loops that protect the connector during installation from debris. This simultaneously provides an easy and safe way to pull the Runner through conduit or construction framework. These features enable a Runner to be pulled through a conduit as small as 3/4” in diameter, while the Runner itself is flexible and durable enough that it can pass through a 90° sweep*.

The first step in building your RapidRun system is choosing the appropriate Runner for the applications you are connecting. Three Runner options are available, all CL2-rated for in-wall use. The Home Theater (Blue) and PC/Video (Yellow) Runners are also available with a plenum-rated jacket. Home Theater and PC/Video Runners are available in lengths of 15, 25, 35, 50, 75, 100, 125, and 150ft. Digital Runners are available in lengths of 15, 25, 35, 50, and 65ft. Below is a detailed description of each Runner option. Make your selection to meet the requirements of your installation.

Choose one of these options:

	PC/VIDEO RUNNER 3-28 AWG Coaxial Cables with Braided Copper Shielding, 3-24 AWG Twisted Pair plus a single 24 AWG Pair Mylar™ Foil Shield UXGA Runner for PC Applications UXGA Supports Resolutions up to 1600 x 1200 Pixels Pulling cap designed to withstand 15 pounds of pulling tension Available in CL2-rated jacket for residential installations and CMP jacket for commercial installations
	HOME THEATER RUNNERS 5-miniature Coaxial Assemblies 28 AWG Stranded Copper Conductors with Mylar™ Foil and 85% Braided Copper Shield Ideal for A/V and Component Video Applications Compatible with Analog and S/PDIF Digital Audio Pulling cap designed to withstand 15 pounds of pulling tension Available in CL2-rated jacket for residential installations and CMP jacket for commercial installations
	Digital Runners 4-24 AWG twisted pairs with Mylar™ foil and drain wire, a single 24-AWG twisted pair plus 5-24 AWG conductors Optimized design for TMDS uncompressed digital video; HDMI and DVI Overall Mylar™ foil shield and tinned copper braid Pulling cap designed to withstand 15 pounds of pulling tension Ideal for home theater and PC applications CL-2 rated PVC for in-wall installation