|
Voice Path routes the audio from any telephone into your PC sound
card. Simply connect between the handset and base of your telephone.
The attached cables connect directly to the in and out jacks of your
sound card. Use your PC software to record, edit, and then play your
conversation right back into the phone line.
Endless possibilities such as: News rooms, Weather and Traffic
reports, Ad Creation and Proofing, Transcribing, Voice Mail Prompts,
Production Room...
Once installed, Voice Path continuously routes both sides of your
conversation to the mic input of your PC (or Mac) sound card. Simply
press in the gray button when you are ready to play audio recordings
back into the phone line. With the button in, Voice Path will
disconnect the microphone from your handset and send audio down the
phone line and into your receiver. You will hear the transmit audio
as well as the voice from the other end of the call.
When sending audio into a telephone, Voice Path must emulate the
microphone that is in the handset. A switch on the back of Voice
Path allows you select between the three basic types of handset
microphone: electret, dynamic, and carbon. Signal level to the PC
sound card is also adjustable.
Voice Path will not work with telephones that have a keypad in
the handset.
|
 |
