 |
|
|
|
 |
Satellite
Diplex-Mixers - Separator-Combiners
Satellite Multi-Switchers
Prices subject to change without notice.
Minimum order for accessory items is $25.00
| Purchase products using our shopping cart by entering the model number into the search box below |
| Satellite Diplex-Mixers 5-2050MHz satellite splitter-combiners separates or combines off-air TV-antenna and satellite signals from or onto a single feed-line, high performance printed-board circuitry, anti-corrosion chromate zinc-alloy die-cast housing, 90dBmin RFI shielding, epoxy-sealed back-cover 1/2" precision machined F-connector threads, DC pass-through current 500mA max, insertion loss VHF-UHF 0.5dB - satellite 1.5dB, isolation VHF 25dB - UHF 20dB - satellite 23dB, return loss VHF 18dB - UHF 10dB - satellite 12dB |
||
| Item# | Price | Description |
| 201-252 |
7.92 |
2GHz TV-satellite diplexer |
| 201-254 | 3.99 | Satellite Splitter Combiner |
| Multi
Receiver Switch Dual-control multi-receiver switch suitable for DSS, C-Band or KU-band dish installations. Connects 2 satellite LNB inputs and off air TV antenna input to 4 or 8 Satellite receivers. |
||
| 201-738 | 64.95 | 3X8 TV-Satellite Multi-Switch |
| 201-739 | 7.99 | 201-738 Power Supply |
| Inline
Amplifiers Suitable for Satellite, and MATV Power requirements 12-18VDC 45mA DC power passing 500mA Maximum, Precision machined F-threads nickel-plated zinc diecast housing, suitable for indoor-outdoor use. |
||
| 201-605 | 7.86 | 16-20DB sloped 450-2250MHz |
| 201-610 | 7.86 | 20dB 950-2050 MHz |
| Separator-Combiners | ||
| Item# | Price | Description |
| 201-602 |
2.68 |
VHF Hi-low separator-combiner |
| 201-604 |
2.68 |
VHF-UHF band separator-combiner |
| Cascade
Multi-Switches 22kHz Tone-controlled cascadable multiswitches suitable for MDU networks over 20 subscribers. Used in multiple-LNB installations for reception from multiple satellites combining off-air TV-antenna and satellite signals on a single feed line. |
||
| Item# | Price | Description |
| 201-854 | 5x4 Cascading Multi Switch | |
| 201-856 | 5x6 Cascading Multi Switch | |
| Cascade
Trunk Amplifiers Repeater amplifier for cascade multiswitch system. Suitable for MDU networks over 20 subscribers. Suitable for DireTV-Para-Todos and HDTV feeds. SMD multiple-layered printed circuit board design. |
||
| Item# | Price | Description |
| 201-910 | Not Available | |
| Satellite Multi-Switches Dual-control multi-receiver switches suitable for DSS, C-band, or KU-band dish installations, connects 2 satellite LNB inputs and off-air TV antenna input to 2 or 4 or 8 satellite receivers. Routes any input to any output using 13-14V vertical or 17-18V horizontal polarities set at the receiver. Combines off-air TV-antenna and satellite signals on a single feed-line to each of 2, 4 or 8 receivers. Built-in IF-amplifier compensates for insertion loss. Nickel-plated zinc-alloy die-cast housing, precision machined F-connector threads, impedance 75-Ohms, frequency 40-2150MHz, receiver-to-receiver isolation 20dB typical, DC pass through current 500mA maximum, power consumption 70mA typical, dimensions 5"(w)x3"(h)x11/8"(d) |
||
| Item# | Price | Description |
| 201-732 | CALL | 3x2 TV-satellite Multiswitch |
| 201-734 | CALL | 3x4 TV-satellite Multiswitch |