|
|||||||||
|
|||||||||
         |
|
|
||||||||||||||||||||||||||||||||
Scotchlok™ 4460 (No Tabbing Required): The 4460 is designed to make a stable, low-resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, or wire. The connector consists of: lower member (base), upper member (top), and two securing nuts (lock nuts).
 The Base teeth are set at such an angle as to permit easy insertion under the cable shield. Top and base members are made of tin-plated tempered brass, slightly curved to exert a continuous spring force on sheath and shield after clamping. Scotchlok 4460-S: Designed to make a stable, low-resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, or wire. The connector consists of five parts: lower member (base), upper member (top), two securing nuts (lock nuts) and a plastic shoe to aid connector insertion and to protect conductors. The base teeth are set at such an angle as to permit easy insertion under the cable shield. Top and base members are made of tin-plated tempered brass, slightly curved to exert a continuous spring force on sheath and shield after clamping. Scotchlok 4460-D: A downsized version of the 4460. Its small size makes it an excellent choice for cables of 100-pair or less. Its current-carrying capacity is equal to or better than aluminum-shielded cables of 100-pair or less and can be used on all cable with 20.3mm (0.8") or smaller O.D. Scotchlok 4462 (Designed Specifically For C.A.C.S.P. Cable): Designed to make a stable, low resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, wire or braid. Scotchlok 4462-FN includes flanged nuts. Scotchlok 4462-SN: An improved version of the 4462, with a longer and stronger stud to easily accommodate two bond braids (with eyelets). It is specifically designed to supply greater pullout strength than the 4462. The nuts have been deepened, too, making it much easier to hold and torque tool. The 4462-SN is also designed for use with coated cables and has superior electrical properties for the protection of data circuits. Scotchlok 4462-SNA: The 4462-SNA has a longer stud, deepened nuts and an insulating shoe. |
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
Shield Bond Connectors and Accessories