Loading... Please wait...

DNA-510 Add Emergency Mass Notification Messages and Alert Tones to your Existing Paging System

Bookmark and Share
  • DNA-510 Add Emergency Mass Notification Messages and Alert Tones to your Existing Paging System
Price:
$312.00
SKU:
032-023
Brand:
Condition:
New
Shipping:
Calculated at checkout
Bookmark and Share

Product Description

The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system.

The DNA-510 connects to a phone line, analog phone system station or a phone system’s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone.

When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced.

The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc.

  • Non-volatile memory (no batteries required)
  • Up to 2 minutes of total message record time
  • Record up to 5 different emergency messages
  • Ten different emergency alert tones:
    1. Code 3 Temporal (ANSI S3.41) Slow Whoop
    2. Hi/Low Siren
    3. Wail Siren
    4. Alert horn
    5. Attack Siren
    6. Fast Sweep Siren
    7. March Time Horn
    8. Bell
    9. Buzzer
    10. 1K Hz Steady Tone
  • Call progress detection for automatic hang up on CPC, busy signal, dial tone or silence
  • Separate volume controls for paging, messages and alert tones
  • Automatically interrupts current page or background music to inject emergency announcement, alert tones or live page
  • Programmable trigger input to activate a message and/or alert tone
  • N.O. & N.C. trigger output contacts for activating flashing beacon (BLK-3-EWP), Alarm Dialer (K-202-DVA), etc.
  • Security code to prevent fraudulent use
  • Connects directly to an unused line input (trunk) or station port of a phone system or to a dedicated phone line

EZOrder

Click the button below to add the DNA-510 Add Emergency Mass Notification Messages and Alert Tones to your Existing Paging System to your EZOrder list.

You Recently Viewed...