Loading... Please wait...

10 TOGGLER 3/16" Snaptoggle with Bolts

Bookmark and Share
  • 50375 10 TOGGLER 3/16" Snaptoggle with Bolts
  • Drill a 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1-7/8" (48mm).
  • Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall.
  • Snap straps at wall by pushing side to side, snapping off straps level with flange of cap.
  • Place item over flange. Insert bolt through item and tighten until flush against item, then stop.
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Bookmark and Share

Product Description

Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors

TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.

Ideal for mounting: Flat Panel TVs, DSS Antennas, TV Mounts, Solar Panels. Use on: Cinder Block, Drywall, Plaster, Stucco. Fiberglass


Attributes of TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...

  • Cost-effective: Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
  • Strongest toggle bolt in smallest hole
  • Convenient: Allow removal of bolt or fixture without anchor falling behind wall.
  • Most reliable: Will not damage or break through wall even when vibrated.
  • Easy to Use: Pre-install without bolt.
  • Accurate: Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion—and bolt won't sag.
  • Quick: Can be used with a screw gun—anchor won't spin in hole.
  • 10 Heavy Duty 3/16" Toggle Bolts
  • 10 3/16" -24 x 2 1/2" Bolts
  • Holds up to 238lbs in 1/2" Drywall
  • Holds up to 802lbs in Concrete Block
  • Uses 1/2" Drill
  • Made in the USA

Product Videos

SNAPTOGGLE Toggle Bolts ()


Click the button below to add the 10 TOGGLER 3/16" Snaptoggle with Bolts to your EZOrder list.

You Recently Viewed...